Changes
* Exceeding these ratings could cause permanent damage to the device. This is a stress rating only and functional operation of the devices at these conditions is not implied -- operating ranges are specified in Standard Conditions. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Data labelled " typical" is presented for design guidance only and is not guaranteed.
'''Storage Conditions (unless otherwise noted):'''
Vcc = ± 5V ±5%
Operating Temperature = 0°C to +70°C
{|{{Prettytable|width: 700px; font-size: 2em;}}|'''Characteristics '''||'''Min '''||'''Sym '''||'''Max '''||'''Units '''||'''Conditions '''|-|'''DC CHARACTERISTICS '''|-|'''All inputs '''|-|Low level ||Vil ||0 ||0.7 ||V |-|High level ||Vih ||2.2 ||Vcc ||V |-|'''All Outputs (except Analog Channel Outputs '''|-|Low level ||Vol ||0 ||0.4 ||V ||1 ||TTL ||Load |-|High level ||Voh ||2.4 ||Vcc ||V ||+100pf |-|'''Analog Channel Outputs '''||Vo ||0 ||2000 ||uA ||Test Curcuit: Fig 6 |-|'''Power Supply Current '''||Icc ||- ||85 ||mA |-|'''AC CHARACTERISTICS '''|-|'''Clock Input '''||Fig 7. |-|Frequency ||fc ||1 ||2.5 ||MHz |-|Rise Time ||tr ||- ||50 ||ns |-|Fall Time ||tf ||- ||50 ||ns |-|Duty Cycle ||- ||40 ||60 ||% |-|'''Bus Signals (BDIR,BC2,BC1) '''|-|Associative Delay Time ||tao ||- ||50 ||ns |-|'''Reset '''||Fig. 8 |-|Reset Pulse Width ||trw ||5 ||- ||us |-|Reset to Bus Control Delay Time ||trb ||100 ||- ||ns |-
|'''A9, A8, DA7--DA0 (Address Mode)'''||Fig 9
|-
