SYMBiFACE II:RTC routines
From CPCWiki - THE Amstrad CPC encyclopedia!
These are the SYMBiFACE II realtime clock routines of SymbOS, written by Prodatron. They show how to read and set the date and time of the RTC.
timrtcadr equ #fd15
rtc_sec equ #00 ;actual second (0-59)
rtc_sec_alarm equ #01 ;alarm second (0-59)
rtc_min equ #02 ;actual minute (0-59)
rtc_min_alarm equ #03 ;alarm minute (0-59)
rtc_hour equ #04 ;actual hour (0-23)
rtc_hour_alarm equ #05 ;alarm hour (0-23)
rtc_day_week equ #06 ;day of the week
rtc_day equ #07 ;day of the month (1-31)
rtc_month equ #08 ;month (1-12)
rtc_year equ #09 ;year (0-99)
rtc_status_a equ #0a ;Status A
rtc_status_b equ #0b ;Status B
rtc_status_c equ #0c ;Status C
rtc_memtest equ #0f ;ram test
rtc_mil equ #32 ;millennium (19-20)
timadr db rtc_status_b,rtc_sec,rtc_hour,rtc_min,rtc_month,rtc_day,rtc_year,rtc_mil,rtc_status_b
db #87
timreg ds 7
db #07
;### TIMSET -> Updates SYMBiFACE II RTC
;### Input A=seconds, B=minutes, C=hours, D=day (1-31), E=month (1-12), HL=year (1900-2099)
;### Destroyed AF,BC,DE,HL,IY
timset ld (timreg+0),a ;*** realtime clock (CPC version)
ld (timreg+1),bc
ld (timreg+3),de
call timset0
ld bc,2000
or a
sbc hl,bc
ld a,20
jr nc,timset2
ld bc,100
add hl,bc
ld a,19
timset2 ld h,a ;L=year, H=millennium
ld (timreg+5),hl
ld bc,timrtcadr
ld iy,timadr
ld e,9
timset3 ld a,(iy+0)
out (c),a
dec c
ld a,(iy+9)
out (c),a
inc c
inc iy
dec e
jr nz,timset3
ret
;### TIMGET -> Read SYMBiFACE II RTC
;### Output CF=0 -> A=seconds, B=minutes, C=hours, D=day (1-31), E=month (1-12), HL=year (1900-2099)
;### CF=1 -> time is currently been updated; please try again later
;### Destroyed F,IY
timget ld bc,timrtcadr ;*** realtime clock (CPC version)
ld a,rtc_status_a
out (c),a
dec c
in a,(c)
inc c
rla
ret c ;time is currently been updated -> abort
ld iy,timadr+1
ld e,7 ;read 7 registers
timget3 ld a,(iy+0)
out (c),a
dec c
in a,(c)
inc c
ld (iy+9),a
inc iy
dec e
jr nz,timget3
ld hl,(timreg+5) ;calculate year
ld a,h
ld h,0
ld bc,1900
cp 19
jr z,timget2
ld bc,2000
timget2 add hl,bc
ld a,(timreg+0) ;get registers
ld bc,(timreg+1)
ld de,(timreg+3)
or a
ret
