Difference between revisions of "Disc Wizard"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Technical) |
(→Technical) |
||
| Line 18: | Line 18: | ||
* Dissassembly of the code indicates it uses an I/O port &f0e0, and sends the data 0,1,2 or 3. It is not clear the function or the exact decoding of this port. | * Dissassembly of the code indicates it uses an I/O port &f0e0, and sends the data 0,1,2 or 3. It is not clear the function or the exact decoding of this port. | ||
| + | |||
| + | Unanswered questions: | ||
| + | * What happens when a reset is triggered? | ||
| + | * What is the decoding of the I/O port? | ||
| + | * Can the ROM be paged in and read through software? | ||
| + | * What is the disc format supported by the disc wizard? | ||
| + | * Can you have other files on the disc at the same time or is it a special disc format? | ||
== Pictures == | == Pictures == | ||
Revision as of 03:24, 14 August 2013
The Disc Wizard was an addon from Draysoft & Evesham Micro Centre that allowed you to make dumps of the CPC memory to external storage, pretty much like the Multiface and similar interfaces.
Contents
Technical
- Button triggers NMI
- 8K ROM data has 4 regions. There is an NMI vector at offsets &0066, &0866, &1066 and &1866 within the ROM data. This suggests each of the 4 regions is selectable and mappable into the range &0000-&7ff.
What is not clear is that when the chosen region is mapped into the Z80 memory space if the region in &0000-&7ff is repeated through to the end of &3fff.
* Region 0 appears to be for saving "DraySoftONE". * Region 1 appears to be for loading "DraySoftONE" * Region 2 appears to be saving for "DraysoftTWO". * Region 3 appears to be for loading "DraysoftTWO"
It seems that the "1/2" switch on the PCB chooses between which 4k (assumption it is connected to A12 of the EPROM), then the "load/save" switch chooses between the 2k within that 4k (assumption it is connected to A11 of the EPROM).
- Dissassembly of the code indicates it uses direct FDC disc access for loading/saving.
- Dissassembly of the code indicates it uses an I/O port &f0e0, and sends the data 0,1,2 or 3. It is not clear the function or the exact decoding of this port.
Unanswered questions:
- What happens when a reset is triggered?
- What is the decoding of the I/O port?
- Can the ROM be paged in and read through software?
- What is the disc format supported by the disc wizard?
- Can you have other files on the disc at the same time or is it a special disc format?
Pictures
- Draysoft & Evesham Micro Centre Disc Wizard
Front View
Back View
PCB Top
PCB_Bottom
- better pics by Terje Grind
Front View
Back View
PCB Top
PCB_Bottom
Manual
Download
- DiscWizard v1.2 zipped ROM file (ROM image for Emulators)
Links
- Disc Wizard at the English-language Wikipedia (Disc Wizard is mentioned in the Multiface's Similar products section)
