Difference between revisions of "MM12"
(→Technical Specs.) |
|||
| Line 27: | Line 27: | ||
| 5V 2.4A | | 5V 2.4A | ||
|} | |} | ||
| + | |||
| + | |||
| + | The MM12 accepts a luminance, sync and ground signal in a similar way to the GT64/GT65. It also has inputs for stereo sound. | ||
== Pictures == | == Pictures == | ||
Revision as of 04:17, 11 March 2011
This was the amber monochrome monitor sold together with the CPC464plus/CPC6128plus computers. It was also available as an option to the GX4000 video console.
As the disk drive of the CPC6128plus didn't needed 12V anymore, the monitor provided a 5V power supply only. Unlike the precedessors GT64/GT65 it also had built-in stereo speakers and thus a different connector for the signals. It can therefore not be used for the classic CPCs without adaptor cable.
Technical Specs.
| Tube diameter: | 30.5cm/12" |
| Visible diameter: | ??cm/??" |
| Input voltage: | 220V~/50Hz |
| Power consumption: | 42W / 0.22A |
| Output voltage: | 5V 2.4A |
The MM12 accepts a luminance, sync and ground signal in a similar way to the GT64/GT65. It also has inputs for stereo sound.
Pictures
MM12 front
MM12 back (showing vhold dial)
MM12 side (showing one speaker)
MM12 other side (showing the other speaker)
MM12 back (showing information plate)
MM12 front (showing dials and power. Monitor is on it's side)
MM12 underneath
Weblinks
Notes
Not to be confused with the Schneider monitor with the same model name, as that one was the Hercules Monochrome monitor for the Schneider EuroPC and similar!
User Manual
The procedure of setting up the CPCplus/GX4000 with the MM12 monitor is described in the CPC464plus/CPC6128plus and GX4000 User Manual.
