Difference between revisions of "Cirkit serial interface"
From CPCWiki - THE Amstrad CPC encyclopedia!
Line 4: | Line 4: | ||
* Some information fragments are here: [[Cirkit]]. | * Some information fragments are here: [[Cirkit]]. | ||
+ | |||
+ | == Technical == | ||
+ | |||
+ | * I/O ports are unknown...? | ||
+ | * Chipset: uses 8251 UART (according to the advert) | ||
+ | * Note - Cirkit reportedly also made a "Twin-port" serial interface (which probably used other chipset) | ||
+ | |||
+ | == Pictures == | ||
+ | |||
+ | <gallery> | ||
+ | Imaged:NoPicture.gif|Circuit board, etc. | ||
+ | </gallery> | ||
+ | |||
+ | == Downloads == | ||
+ | |||
+ | * None such...? | ||
+ | |||
+ | == Specs (from advert) == | ||
+ | |||
+ | * Plugs into Disk Drive, through Bus Connector for Disk Drives and other peripherals. | ||
+ | * Can be used to interface to other RS232 devices, such as Modems, Plotters and Printers. | ||
+ | * Baud rates supported 75/1200, 1200/1200 and 300/300 | ||
+ | * INPUTS:- Data, one handshake - RS232 compatible | ||
+ | * OUTPUTS:- Data, one handshake - +5 volt positive going Works with all TTL level inputs and most RS232 devices. | ||
+ | * All interface features are software addressable, uses 8251 UART. | ||
+ | * Supplied with full RSX drivers, which may be used in your own programs. | ||
+ | * Not directly compatible with Amstrad CPM. | ||
+ | * Extensive documentation about interface and RSX's supplied on cassette. | ||
[[Category:Hardware]] [[Category:Peripherals]] [[Category:Serial_interfaces]] | [[Category:Hardware]] [[Category:Peripherals]] [[Category:Serial_interfaces]] |
Revision as of 12:39, 27 January 2010
Reportedly, it did "flourish", but almost nothing else is known.
- Some information fragments are here: Cirkit.
Technical
- I/O ports are unknown...?
- Chipset: uses 8251 UART (according to the advert)
- Note - Cirkit reportedly also made a "Twin-port" serial interface (which probably used other chipset)
Pictures
- Imaged:NoPicture.gif
Circuit board, etc.
Downloads
- None such...?
Specs (from advert)
- Plugs into Disk Drive, through Bus Connector for Disk Drives and other peripherals.
- Can be used to interface to other RS232 devices, such as Modems, Plotters and Printers.
- Baud rates supported 75/1200, 1200/1200 and 300/300
- INPUTS:- Data, one handshake - RS232 compatible
- OUTPUTS:- Data, one handshake - +5 volt positive going Works with all TTL level inputs and most RS232 devices.
- All interface features are software addressable, uses 8251 UART.
- Supplied with full RSX drivers, which may be used in your own programs.
- Not directly compatible with Amstrad CPM.
- Extensive documentation about interface and RSX's supplied on cassette.