Difference between revisions of "ACU Romboard (DIY)"
From CPCWiki - THE Amstrad CPC encyclopedia!
| Line 11: | Line 11: | ||
==Technical== | ==Technical== | ||
| − | ROM Selection is made using a port decoded with A13=0, A14=1. D3 must be 0, D2..D0 select the ROM, allowing up to | + | ROM Selection is made using a port decoded with A13=0, A14=1. D3 must be 0, D2..D0 select the ROM, allowing up to 8 ROMs to be selected, but the PCB only has 6 EPROM sockets. Sockets for ROM 0 and ROM 7 aren't fitted. |
More than one value can select the same ROM (e.g. &11 will also select &1). | More than one value can select the same ROM (e.g. &11 will also select &1). | ||
[[Category:Peripherals]] [[Category:DIY]] | [[Category:Peripherals]] [[Category:DIY]] | ||
Latest revision as of 03:53, 30 June 2011
A DIY project to make a romboard
Designed by Phil Craven, released in Amstrad Computer User (December 1988, pages 35,37,38).
Technical
ROM Selection is made using a port decoded with A13=0, A14=1. D3 must be 0, D2..D0 select the ROM, allowing up to 8 ROMs to be selected, but the PCB only has 6 EPROM sockets. Sockets for ROM 0 and ROM 7 aren't fitted. More than one value can select the same ROM (e.g. &11 will also select &1).
