Difference between revisions of "Amstrad LP-1 light pen"

Revision as of 13:13, 24 February 2010

The LP-1 Lightpen by Amstrad

The LP-1 is the official Amstrad lightpen (with software from Amsoft, and hardware from Trojan).

The CAD-MASTER seems to be the same hardware (but marketed directly by Trojan, and with different Software included).

Technical

Connects to the Joystick port (not to the Lightpen input on the Expansion Port).

 Input:
 Light Sensor --> Keyboard.Row9.Bit1 (aka Joystick Down) (0=Light, 1=No Light)
 Output:
 Keyboard.Row9 is constantly held LOW during lightpen access
 Keyboard.Row6 is constantly held HIGH during lightpen access
 Keyboard.Colums aka PSG.Ext.PortA are configured as inputs aka HIGH-Z

The above LOW and HIGH (or HIGH-Z) levels seem to be misused as power supply GND and 5V. There seems to be no power-supply required for the CPC version (unlike the ZX Spectrum version, which connects to cassette EAR port, and which requires an external 9V battery).

• As seen on the package and advert, both the LP-1 and CAD-MASTER light pens work with colour monitor only, ie. not with green screens.

Pictures

• Amstrad LP-1 (Amstrad/Trojan)
• 

  Advert

• 

  Package

• 

  Connector/Schematic

• 

  Pen

• Trojan Cad-Master (Trojan)
• 

  Front

• 

  Back

• 

  Open

• 

  Pen

Software / Downloads

• LP-1 drivers - (raw bas/bin files) (english) (Software taken from John King's website)
• LP-1 drivers (cdt tape file) (French)
• Trojan CAD-MASTER.zip - none such?

Manual

• Amstrad LP-1 Light Pen Manual (jpg's) (French)
• Amstrad LP-1 Light Pen Manual (pdf) (French)
• Trojan CAD-MASTER Manual - none such?