Difference between revisions of "Amstrad LP-1 light pen"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(Software / Downloads)
(Software / Downloads)
 
(15 intermediate revisions by 3 users not shown)
Line 12: Line 12:
 
   Output:
 
   Output:
 
   Keyboard.Row9 is constantly held LOW during lightpen access
 
   Keyboard.Row9 is constantly held LOW during lightpen access
   Keyboard.Row6 is constantly held HIGH during lightpen access
+
   Keyboard.Row6 is constantly held floating during lightpen access (isn't HIGH because it's open collector)
 
   Keyboard.Colums aka PSG.Ext.PortA are configured as inputs aka HIGH-Z
 
   Keyboard.Colums aka PSG.Ext.PortA are configured as inputs aka HIGH-Z
The above LOW and HIGH (or HIGH-Z) levels seem to be misused as power supply GND and 5V. There seems to be no power-supply required for the CPC version (unlike the ZX Spectrum version, which connects to cassette EAR port, and which requires an external 9V battery).
+
The above LOW and HIGH-Z levels seem to be misused as power supply GND and 5V. There seems to be no power-supply required for the CPC version (unlike the ZX Spectrum version, which connects to cassette EAR port, and which requires an external 9V battery).
  
 
* As seen on the package and advert, both the LP-1 and CAD-MASTER light pens work with '''colour monitor only''', ie. not with green screens.
 
* As seen on the package and advert, both the LP-1 and CAD-MASTER light pens work with '''colour monitor only''', ie. not with green screens.
Line 23: Line 23:
 
File:Amstrad Crayon Optique LP-1 Advert.jpg|Advert
 
File:Amstrad Crayon Optique LP-1 Advert.jpg|Advert
 
File:Amstrad Crayon Optique LP-1 Package.jpg|Package
 
File:Amstrad Crayon Optique LP-1 Package.jpg|Package
File:NoPicture.gif|Connector/Schematic
+
File:Amstrad LP-1.jpg|Amstrad Light Pen LP-1 Package - English
 
File:Amstrad light pen.jpg|Pen
 
File:Amstrad light pen.jpg|Pen
 
</gallery>
 
</gallery>
Line 36: Line 36:
 
== Software / Downloads ==
 
== Software / Downloads ==
  
[[Media:LIGHTPEN.ZIP|LP-1 drivers]] - (raw bas/bin files) (english) (Software taken from John King's website)
+
* [[Media:LIGHTPEN.ZIP|Amstrad LP-1 drivers]] - (English) (bas/bin) - [http://www.cpcwiki.eu/index.php/User:Jonathanen Jonathanen]
[[Media:Amstrad Crayon Optique Trojan LP-1 Tape.zip|LP-1 drivers]] (cdt tape file) (French)
+
* [[Media:LP-1.zip‎|Amstrad LP-1 drivers]] - (English) (DSK for Emulators) - [http://www.cpcwiki.eu/index.php/User:Jonathanen Jonathanen]
[[CAS-MASTER.ZIP]] - none such?
+
* [[Media:Amstrad Crayon Optique Trojan LP-1 Tape.zip|Amstrad LP-1 drivers]] - (French) (cdt)
 +
* [[Trojan CAD-MASTER drivers.zip]] - none such?
 +
 
 +
The LP-1 package consists of MCPEN.BIN (machine code driver), and LIGHTPEN.BAS (instructions, demonstration, and NIM game).
  
 
== Manual ==
 
== Manual ==
Line 44: Line 47:
 
* [[Amstrad LP-1 Light Pen Manual]] (jpg's) (French)
 
* [[Amstrad LP-1 Light Pen Manual]] (jpg's) (French)
 
* [[Media:Lightpen LP-1.pdf|Amstrad LP-1 Light Pen Manual]] (pdf) (French)
 
* [[Media:Lightpen LP-1.pdf|Amstrad LP-1 Light Pen Manual]] (pdf) (French)
 +
* [[Trojan CAD-MASTER Manual]] - none such?
  
[[Category:Hardware]] [[Category:Peripherals]][[Category:Amstrad Products]]
+
[[Category:Input Device]] [[Category:Peripherals]][[Category:Amstrad Products]]

Latest revision as of 04:04, 13 December 2018

The LP-1 Lightpen by Amstrad

The LP-1 is the official Amstrad lightpen (with software from Amsoft, and hardware from Trojan).

The CAD-MASTER seems to be the same hardware (but marketed directly by Trojan, and with different Software included).

Technical

Connects to the Joystick port (not to the Lightpen input on the Expansion Port).

 Input:
 Light Sensor --> Keyboard.Row9.Bit1 (aka Joystick Down) (0=Light, 1=No Light)
 Output:
 Keyboard.Row9 is constantly held LOW during lightpen access
 Keyboard.Row6 is constantly held floating during lightpen access (isn't HIGH because it's open collector)
 Keyboard.Colums aka PSG.Ext.PortA are configured as inputs aka HIGH-Z

The above LOW and HIGH-Z levels seem to be misused as power supply GND and 5V. There seems to be no power-supply required for the CPC version (unlike the ZX Spectrum version, which connects to cassette EAR port, and which requires an external 9V battery).

  • As seen on the package and advert, both the LP-1 and CAD-MASTER light pens work with colour monitor only, ie. not with green screens.

Pictures

Software / Downloads

The LP-1 package consists of MCPEN.BIN (machine code driver), and LIGHTPEN.BAS (instructions, demonstration, and NIM game).

Manual