Difference between revisions of "Octoate"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Hardware projects) |
m |
||
Line 1: | Line 1: | ||
[[Image:Octoate.jpg|thumb]] | [[Image:Octoate.jpg|thumb]] | ||
− | '''Octoate''' | + | '''Octoate''' bought his Schneider CPC in 1985 and joined the scene very late (ca. 1998). He is mostly working on hardware extensions and started the [[CPC-IDE]] project, which was the predecessor of the [[SYMBiFACE II]], in autumn 2004 together with [[Dr.Zed]] (he developed the hardware) [[Tolkin]] and [[TFM]]. Most of his soft- and hardware projects were only made for his own usage and never reached the public. |
== Hardware projects == | == Hardware projects == |
Revision as of 16:30, 16 December 2010
Octoate bought his Schneider CPC in 1985 and joined the scene very late (ca. 1998). He is mostly working on hardware extensions and started the CPC-IDE project, which was the predecessor of the SYMBiFACE II, in autumn 2004 together with Dr.Zed (he developed the hardware) Tolkin and TFM. Most of his soft- and hardware projects were only made for his own usage and never reached the public.
Hardware projects
- 4-color scanner for a printer (similar to the Dart Scanner)
- 7-bit relais card
- CPC-IDE Interface (financial support and beside the one by Dr.Zed some different prototypes using 8255, CPLD and CPC Booster with Vinculum)
- Flash-ROM-Box (only one prototype, used the Atmel AT90F040 flash rom)
- Flash-ROM-Cartridge for the CPC Plus
- GMX Mouse to CPC Joystick port adapter
- ROM-Box (small interface for only one ROM)
- VHDL implementation of the ACID protection chip (will be released if it works without flaws)
Software
- Disc Image Copy (DIC - transfered whole disks over the printer port to a PC)
- Plotter driver for the relais card (controlled a self-made plotter)
- CPC Booster RS232 driver for Z88DK