Difference between revisions of "GX4000 cartridge"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
Line 12: Line 12:
 
   (----- EPROM -----) (------------------------ Links installed -------------------------)
 
   (----- EPROM -----) (------------------------ Links installed -------------------------)
 
   Type    Pins  Size  A15                    A17                    A18
 
   Type    Pins  Size  A15                    A17                    A18
   27C256  28    32K  LK5 (A15=VCC=High)    LK4 (A17=VCC=Supply)  N/A
+
   27C256  28    32K  LK5 (A15=VCC=High)    LK3 (A17=VCC=Supply)  N/A
   27C512  28    64K  LK6 (A15=A15=Address)  LK4 (A17=VCC=Supply)  N/A
+
   27C512  28    64K  LK6 (A15=A15=Address)  LK3 (A17=VCC=Supply)  N/A
 
   27C1001  32  128K  LK6 (A15=A15=Address)  N/A                    LK1 (A18=VCC=/PGM)
 
   27C1001  32  128K  LK6 (A15=A15=Address)  N/A                    LK1 (A18=VCC=/PGM)
   27C2001  32  256K  LK6 (A15=A15=Address)  LK3 (A17=A17=Address)  LK1 (A18=VCC=/PGM)
+
   27C2001  32  256K  LK6 (A15=A15=Address)  LK4 (A17=A17=Address)  LK1 (A18=VCC=/PGM)
   27C4001  32  512K  LK6 (A15=A15=Address)  LK3 (A17=A17=Address)  LK2 (A18=A18=Address)
+
   27C4001  32  512K  LK6 (A15=A15=Address)  LK4 (A17=A17=Address)  LK2 (A18=A18=Address)
 
Some cartridge PCBs don't have any LKs installed, instead, the etched circuit has hardwired connections between some of them. One could scratch them off, and then use the LK soldering points to reconfigure the board for eproms of other size.
 
Some cartridge PCBs don't have any LKs installed, instead, the etched circuit has hardwired connections between some of them. One could scratch them off, and then use the LK soldering points to reconfigure the board for eproms of other size.
  

Revision as of 05:55, 21 February 2010

A cartridge for the + series

A cartridge system was introduced with the launch of the CPC+ series. This enabled developers to distribute games via cartridges on the new Amstrad. The cartridges are protected with the ACID chip.

EPROMs

All known manufactured cartridges contain EPROMs (rather than PROMs or ROMs). The cartridges can be fitted with different EPROMs in range of 32K through 512K (actually produced are only 128K..256K). The cartridge PCBs typically include six LK Links to match the PCB to the EPROM pin-outs:

 VCC ---LK1--- EPROM.A18 ---LK2--- CA18
 VCC ---LK3--- EPROM.A17 ---LK4--- CA17
 VCC ---LK5--- EPROM.A15 ---LK6--- CA15

Usually the following LKs should be installed:

 (----- EPROM -----) (------------------------ Links installed -------------------------)
 Type    Pins  Size   A15                    A17                    A18
 27C256   28    32K   LK5 (A15=VCC=High)     LK3 (A17=VCC=Supply)   N/A
 27C512   28    64K   LK6 (A15=A15=Address)  LK3 (A17=VCC=Supply)   N/A
 27C1001  32   128K   LK6 (A15=A15=Address)  N/A                    LK1 (A18=VCC=/PGM)
 27C2001  32   256K   LK6 (A15=A15=Address)  LK4 (A17=A17=Address)  LK1 (A18=VCC=/PGM)
 27C4001  32   512K   LK6 (A15=A15=Address)  LK4 (A17=A17=Address)  LK2 (A18=A18=Address)

Some cartridge PCBs don't have any LKs installed, instead, the etched circuit has hardwired connections between some of them. One could scratch them off, and then use the LK soldering points to reconfigure the board for eproms of other size.

Protection

The EPROMs aren't encrypted, making it very easy to dump their content, or to replace them by other EPROMs. However, all cartridges must contain an ACID chip, otherwise the CPC+/GX4000 refuses to work.

  • For details, on the chip see ACID.

All game cartridges (and the system cartridge shipped with the 464+/6128+) include an ACID chip, so, even with limited soldering skills, it's extremely easy to reuse that chip with other EPROMs. Which is meaning that the protection doesn't prevent piracy or homebrew programming. It's only preventing commercially produced unlicensed games (which are more than unlikely to be sold with instructions saying to "de-solder your ACID chip before using this game").

Pictures

Demonstration System

Amstrad released a Demonstration system for his retailer in order to show GX4000 games: the Amstrad CSD.

It was a 464plus motherboard, with an extra "daughter board) allowing the insertion of 12 games cartridges, plus an extra special cartridge acting as an OS.

Courtesy of Amstrad.cpc.free.fr

Pin-Outs

Misc

Links