Difference between revisions of "GX4000 cartridge"
(→Technical specs.) |
(→Technical specs.) |
||
| Line 4: | Line 4: | ||
== Technical specs. == | == Technical specs. == | ||
| − | |||
| − | + | The cartridges can be fitted with different EPROMs in range of 32K through 512K (actually produced are only 128K..256K). The cartridge PCBs typically include six [[LK Links]] to match the PCB to the EPROM pin-outs: | |
| − | + | VCC ---LK1--- EPROM.A18 ---LK2--- CA18 | |
| − | + | VCC ---LK3--- EPROM.A17 ---LK4--- CA17 | |
| − | + | VCC ---LK5--- EPROM.A15 ---LK6--- CA15 | |
| − | + | Usually the following LKs should be installed: | |
| − | + | (----- EPROM -----) (------------------------ Links installed -------------------------) | |
| − | + | Type Pins Size A15 A17 A18 | |
| − | + | 27C256 28 32K LK5 (A15=VCC=High) LK4 (A17=VCC=Supply) N/A | |
| − | + | 27C512 28 64K LK6 (A15=A15=Address) LK4 (A17=VCC=Supply) N/A | |
| + | 27C1001 32 128K LK6 (A15=A15=Address) LK1 (A18=VCC=/PGM) N/A | ||
| + | 27C2001 32 256K LK6 (A15=A15=Address) LK1 (A18=VCC=/PGM) LK3 (A17=A17=Address) | ||
| + | 27C4001 32 512K LK6 (A15=A15=Address) LK2 (A18=A18=Address) LK3 (A17=A17=Address) | ||
| + | Some cartridge PCBs don't have any LKs installed, instead, the etched circuit has hardwired connections between some of them. One could scratch them off, and then use the LK soldering points to reconfigure the board for eproms of other size. | ||
| + | == Misc == | ||
[[RAM7]], a French hardware developer, created a device to hack [[RAM7 Cartridge Hacker|CPC Plus cartridges]]. | [[RAM7]], a French hardware developer, created a device to hack [[RAM7 Cartridge Hacker|CPC Plus cartridges]]. | ||
Revision as of 05:11, 20 February 2010
A cartridge system was introduced with the launch of the CPC+ series. This enabled developers to distribute games via cartridges on the new Amstrad. The cartridges are protected with the ACID chip.
Technical specs.
The cartridges can be fitted with different EPROMs in range of 32K through 512K (actually produced are only 128K..256K). The cartridge PCBs typically include six LK Links to match the PCB to the EPROM pin-outs:
VCC ---LK1--- EPROM.A18 ---LK2--- CA18 VCC ---LK3--- EPROM.A17 ---LK4--- CA17 VCC ---LK5--- EPROM.A15 ---LK6--- CA15
Usually the following LKs should be installed:
(----- EPROM -----) (------------------------ Links installed -------------------------) Type Pins Size A15 A17 A18 27C256 28 32K LK5 (A15=VCC=High) LK4 (A17=VCC=Supply) N/A 27C512 28 64K LK6 (A15=A15=Address) LK4 (A17=VCC=Supply) N/A 27C1001 32 128K LK6 (A15=A15=Address) LK1 (A18=VCC=/PGM) N/A 27C2001 32 256K LK6 (A15=A15=Address) LK1 (A18=VCC=/PGM) LK3 (A17=A17=Address) 27C4001 32 512K LK6 (A15=A15=Address) LK2 (A18=A18=Address) LK3 (A17=A17=Address)
Some cartridge PCBs don't have any LKs installed, instead, the etched circuit has hardwired connections between some of them. One could scratch them off, and then use the LK soldering points to reconfigure the board for eproms of other size.
Misc
RAM7, a French hardware developer, created a device to hack CPC Plus cartridges.
Pictures
- GX4000 cartridges
Inside view of a CPC+ cartridge
Inside view of a CPC+ cartridge
Demonstration System
Amstrad released a Demonstration system for his retailer in order to show GX4000 games: the Amstrad CSD.
It was a 464plus motherboard, with an extra "daughter board) allowing the insertion of 12 games cartridges, plus an extra special cartridge acting as an OS.
- Some photos of Amstrad Expo 90
Courtesy of Amstrad.cpc.free.fr
Link to the French article on the matter
