Difference between revisions of "Amstrad SSA-1 Speech Synthesizer"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(→‎Technical Specs.)
(→‎Technical Specs.)
Line 20: Line 20:
 
The clock frequency (passed to the speech chip) is fixed, the exact frequency is unknown (?)
 
The clock frequency (passed to the speech chip) is fixed, the exact frequency is unknown (?)
  
−
Uses I/O port: [[I/O_Port_Summary|#FBEE]]
+
Uses I/O port: [[I/O_Port_Summary|#FBEE]], of which (according to the manual) only A10,A4,A0 are decoded.
  
 
Port FBEEh READ:
 
Port FBEEh READ:
−
   bit7  status 1 (0=busy, 1=ready/data request)
+
   bit7  Status 1 (0=Speech Busy, 1=Ready/Halted)  (SBY Pin, Speech Busy)
−
   bit6  status 2 (used by 3D Stunt Rider, Roland in Space, Glen Hoddle)
+
   bit6  Status 2 (0=Ready to Receive Data, 1=Busy) (/LRQ Pin, Load Request)
−
   bit5-0 unknown/unused
+
   bit5-0 Not used (garbage, probably usually highz)
−
  (the above status bits are probably the /LRQ and SBY pins)
+
−
  (unknown which is which one though?)
+
−
 
+
 
Port FBEEh WRITE:
 
Port FBEEh WRITE:
−
   bit7-6 unknown/unused (should be zero)
+
   bit7-6 Reserved (must be zero)
−
   bit5-0 allophone number
+
   bit5-0 Allophone number               ;data can be send when Status.Bit6=0
  
 
* [[SP0256]]
 
* [[SP0256]]

Revision as of 09:04, 5 January 2010

Amstrad SSA1 box cover
The bundle

A Speech Synthesizer from Amstrad based on the SPO256-AL2 Speech Synthesizer

Software

  • |SAY,@<string> - Converts a string af ASCII text to speech
  • |ECHO,<mode> - Activates text to speech conversion on text printed to the screen.
  • |APHONE,<allophone>[,<allophone>] - Send allophones directly to the interrupt driven allophone buffer.
  • |ROOM,@<value> - Find out how many free locations in the allophones buffer.
  • |QUIET - Clears the allophone buffer.
  • |SPON - Activates the speech interrrupt event.
  • |SPOFF - To prevent output of data from the allophone buffer.
  • |SPSTATUS,@<value> - Read the status of the speech processor.
  • |SPOUT,<allophone>[,<allophone>] - Sends allophones directly to the soundprocessor.

Technical Specs.

The clock frequency (passed to the speech chip) is fixed, the exact frequency is unknown (?)

Uses I/O port: #FBEE, of which (according to the manual) only A10,A4,A0 are decoded.

Port FBEEh READ: 

 bit7   Status 1 (0=Speech Busy, 1=Ready/Halted)   (SBY Pin, Speech Busy)
 bit6   Status 2 (0=Ready to Receive Data, 1=Busy) (/LRQ Pin, Load Request)
 bit5-0 Not used (garbage, probably usually highz)

Port FBEEh WRITE: 

 bit7-6 Reserved (must be zero)
 bit5-0 Allophone number               ;data can be send when Status.Bit6=0

Supported Games

  • 3D Boxing
  • 3D Stunt Rider
  • Alex Higgin's World Snooker / World Pool
  • Darkwurlde
  • Glen Hoddle Soccer
  • Roland In Space
  • Tubaruba

Pictures

  • Amstrad SSA1

  • Frontpage

  • Inside

  • Inside

  • Inside

  • Inside

  • ScreenPacked.jpg
  • ScreenBoxed.jpg
  • FullSSA1.jpg
  • FullManual Tape.jpg
  • SSA1 FullBox.jpg

Examples of the Amstrad synth in use

{{#ev:youtube|fesVxipNaw8|300}} {{#ev:youtube|v8WKbKK3Apg|300}}

Other Speech Synthesizers

Weblinks

Manual

  • Amstrad SSA1 (Manual)

  • Frontpage

  • Contents

  • Page 1

  • Page 2

  • Page 3

  • Page 4

  • Page 5

  • Page 6

  • Page 7

  • Page 8

  • Page 9

  • Page 10

  • Page 11

  • Page 12

  • Page 13

  • Page 14

  • Page 15

  • Page 16

  • Page 17

  • Page 18

  • Page 19

  • Page 20

Retrieved from "https://gryzor.info/index.php?title=Amstrad_SSA-1_Speech_Synthesizer&oldid=36841"