Difference between revisions of "IDE8255"
(Update) |
|||
| Line 1: | Line 1: | ||
| − | == Description == | + | == Description == |
| − | IDE8255 is the simplest IDE multiplexer (8bit to 16bit) that everyone can build. | + | IDE8255 is the simplest IDE multiplexer (8bit to 16bit) that everyone can build. And its also the fastest, the data transfer rate is 173 KB/second. |
| − | It consists of port decoder, a 8255 PPI chip, 74LS139 chip as control gate and some diodes, resistors and capacitors. The most important is, that the 8255 can work in MODE 1 while reading. | + | It consists of port decoder, a [[8255|8255]] PPI chip, 74LS139 chip as control gate and some diodes, resistors and capacitors. The most important is, that the 8255 can work in MODE 1 while reading. |
| − | MODE 1 automaticly generates read signal for IDE device only by reading PA and PB of 8255, so only one IN per byte is needed. However, writing needs two OUTs per byte. | + | MODE 1 automaticly generates read signal for IDE device only by reading PA and PB of 8255, so only one IN per byte is needed. However, writing needs two OUTs per byte. |
| − | The IDE8255 for CPC is based on universal YAMOD.IDE8255. For CPC other port addresses | + | The IDE8255 for CPC is based on universal YAMOD.IDE8255. For the CPC other port addresses were selected. |
| − | The IDE8255 borad is intended to be internal upgrade for CPC6128, placed between keyboard and 3" drive. It also can be used as external one, as has 50pin slot for flat cable. | + | The IDE8255 borad is intended to be internal upgrade for [[CPC6128|CPC6128]], placed between keyboard and 3" drive. It also can be used as external one, as has 50pin slot for flat cable. |
| − | + | '''Support''' | |
| − | <gallery caption="Pictures of the IDE8255"> | + | The IDE8255 is supported by [[FutureOS|FutureOS]]. |
| + | |||
| + | == Images == | ||
| + | |||
| + | <gallery>caption="Pictures of the IDE8255"> | ||
Image:IDE8255 upper.jpg|Upper side of the PCB | Image:IDE8255 upper.jpg|Upper side of the PCB | ||
Image:IDE8255 lower.jpg|lower side of the PCB | Image:IDE8255 lower.jpg|lower side of the PCB | ||
| − | </gallery> | + | </gallery> |
| − | == Links == | + | == Links == |
[[Category:Hardware]] [[Category:Peripherals]] | [[Category:Hardware]] [[Category:Peripherals]] | ||
Revision as of 17:29, 15 October 2008
Description
IDE8255 is the simplest IDE multiplexer (8bit to 16bit) that everyone can build. And its also the fastest, the data transfer rate is 173 KB/second.
It consists of port decoder, a 8255 PPI chip, 74LS139 chip as control gate and some diodes, resistors and capacitors. The most important is, that the 8255 can work in MODE 1 while reading.
MODE 1 automaticly generates read signal for IDE device only by reading PA and PB of 8255, so only one IN per byte is needed. However, writing needs two OUTs per byte.
The IDE8255 for CPC is based on universal YAMOD.IDE8255. For the CPC other port addresses were selected.
The IDE8255 borad is intended to be internal upgrade for CPC6128, placed between keyboard and 3" drive. It also can be used as external one, as has 50pin slot for flat cable.
Support
The IDE8255 is supported by FutureOS.
Images
Upper side of the PCB
lower side of the PCB
