Difference between revisions of "Amstrad External Disk Drive"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(Pictures)
Line 1: Line 1:
 
'''Amstrad''' made two different disk drives for the Amstrad/Schneider CPC range:
 
'''Amstrad''' made two different disk drives for the Amstrad/Schneider CPC range:
  
* DDI-1 - a set, consisting of the real DDI-1 (= Disk Drive Interface) and a FD-1 3" disk drive, as well as the CP/M 2.2 license and disk. This set was for the CPC464, which doesn't have the disk controller built-in.
+
* DDI-1 - a set, consisting of the real DDI-1 (= Disk Drive Interface) and a FD-1 3" disk drive, as well as the CP/M 2.2 license and disk.
 +
 
 +
This set was for the CPC464, which doesn't have the disk controller built-in.
 +
 
 
* FD-1  - a 3" disk drive as secondary disk drive unit for the CPC664, CPC6128 and CPC464 with DDI-1
 
* FD-1  - a 3" disk drive as secondary disk drive unit for the CPC664, CPC6128 and CPC464 with DDI-1
  
Note that there was no official external disk drive for the 6128Plus or even the 464Plus. While the difference between a CPC664/CPC6128 and a 6128Plus was simply a changed pin-out which can easily be solved by a new plug on the disk drive's cable, the 464Plus was harder to equip with a disk drive: Although the pin-out of the expansion port was left unchanged, the DDI-1 cannot be operated on the 464Plus without modifications.
+
Note that there was no official external disk drive for the 6128Plus or even the 464Plus.
  
[[Image:ddi1.gif|thumb|Amstrad FD-1/DDI-1 disk drive]]
+
While the difference between a CPC664/CPC6128 and a 6128Plus was simply a changed pin-out which can easily be solved by a new plug on the disk drive's cable, the 464Plus was harder to equip with a disk drive: Although the pin-out of the expansion port was left unchanged, the DDI-1 cannot be operated on the 464Plus without modifications.
  
 
== Technically Speaking ==
 
== Technically Speaking ==
Line 24: Line 27:
 
== Pictures ==
 
== Pictures ==
  
<gallery caption="Vidi">
+
<gallery caption="DDI - 1">
  
Image:Vidi Publicity 1.jpg|Publicity 1
+
Image:ddi1.gif|Amstrad FD-1/DDI-1 disk drive
Image:Vidi Publicity 2.jpg|Publicity 2
+
  
 
</gallery>
 
</gallery>

Revision as of 09:40, 26 November 2007

Amstrad made two different disk drives for the Amstrad/Schneider CPC range:

  • DDI-1 - a set, consisting of the real DDI-1 (= Disk Drive Interface) and a FD-1 3" disk drive, as well as the CP/M 2.2 license and disk.

This set was for the CPC464, which doesn't have the disk controller built-in.

  • FD-1 - a 3" disk drive as secondary disk drive unit for the CPC664, CPC6128 and CPC464 with DDI-1

Note that there was no official external disk drive for the 6128Plus or even the 464Plus.

While the difference between a CPC664/CPC6128 and a 6128Plus was simply a changed pin-out which can easily be solved by a new plug on the disk drive's cable, the 464Plus was harder to equip with a disk drive: Although the pin-out of the expansion port was left unchanged, the DDI-1 cannot be operated on the 464Plus without modifications.

Technically Speaking

The two disk drives were identical, the only difference was that the DDI-1 shipped with controller, manual and CP/M 2.2 on one disk.

The disk drives were jumpered (rather: soldered) to react on both drive selects, A: and B:.

The cable decided which drive became A: and which one became B: :

  • On the CPC664 and CPC6128 computers, DRIVE SELECT 0 was not wired externally, so the drive could only become drive B: on these systems.
  • For the DDI-1, DRIVE SELECT 0 was only wired to the outmost connector of the attached cable, while the inner connector was wired to DRIVE SELECT 1 only, thus the drive at the cable's end always became A: while the other one became drive B: accordingly.

Note that the drive also powered the DDI-1 interface when used together with it: Certain pins documented as N/C in the CPC664/CPC6128 manual in fact carry +5V from the drive to the controller. The main benefit of this was, that you couldn't connect a standard drive with a more common format (5¼" in the beginning, 3½" later and today) and thus cheaper disks as drive A: without modifications, as the DDI-1 won't work without the power fed from the FD-1.

Pictures

Manuals

Service Manual