Difference between revisions of "Default I/O Port Summary"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(→‎Memory Mapped I/O Ports)
(→‎Memory Mapped I/O Ports)
 
(17 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
== I/O Ports ==
 
== I/O Ports ==
  
−
{|{{Prettytable|width: 700px; font-size: 2em;}}
+
{| class="wikitable"
−
|'''I/O'''||'''Decoded as'''||'''Port'''||'''Read'''||'''Write'''
+
!I/O
 +
!Decoded as
 +
!Port
 +
!Read
 +
!Write
 
|-
 
|-
 
|#7FXX||%01xxxxxx xxxxxxxx||[[Gate Array]]||-||Write
 
|#7FXX||%01xxxxxx xxxxxxxx||[[Gate Array]]||-||Write
Line 70: Line 74:
 
== Memory Mapped I/O Ports ==
 
== Memory Mapped I/O Ports ==
  
−
{|{{Prettytable|width: 700px; font-size: 2em;}}
+
{| class="wikitable"
−
|'''Mem'''||'''Decoded as'''||'''Port'''||'''Read'''||'''Write'''
+
!Mem
 +
!Decoded as
 +
!Port
 +
!Read
 +
!Write
 
|-
 
|-
 
|#4000-7FFF||%01xxxxxx xxxxxxxx||ASIC - CPC+/GX4000 registers|| Read || Write
 
|#4000-7FFF||%01xxxxxx xxxxxxxx||ASIC - CPC+/GX4000 registers|| Read || Write
Line 77: Line 85:
 
|}
 
|}
  
−
The [[ASIC]] I/O page is defined as follows:
+
See the [[ASIC]] page for details.
−
 
+
−
{|{{Prettytable|width: 700px; font-size: 2em;}}
+
−
! ADDR !! SIZE !! POR !! TYPE !! MNEM !! USE
+
−
|-
+
−
| 4000h || 100h || N || R/W || || Sprite 0 image data
+
−
|-
+
−
| 4100h || 100h || N || R/W || || Sprite 1 image data
+
−
|-
+
−
| ...  || ...  || ... || ...  || ... || ...
+
−
|-
+
−
| 4F00h || 100h || N || R/W || || Sprite 15 image data
+
−
|-
+
−
| colspan="6"|Block unused
+
−
|-
+
−
| 6000h || 2    || N || R/W  || X0  || Sprite 0 X position
+
−
|-
+
−
| 6002h || 2    || N || R/W  || Y0  || Sprite 0 Y position
+
−
|-
+
−
| 6004h || 1    || Y || W    || M0  || Sprite 0 magnification
+
−
|-
+
−
| 6005h || 3    ||  ||      ||    || (unused)
+
−
|-
+
−
| 6008h || 2    || N || R/W  || X1  || Sprite 1 X position
+
−
|-
+
−
| 600Ah || 2    || N || R/W  || Y1  || Sprite 1 Y position
+
−
|-
+
−
| 600Ch || 1    || Y || W    || M1  || Sprite 1 magnification
+
−
|-
+
−
| 600Dh || 3    ||  ||      ||    || (unused)
+
−
|-
+
−
| ...  || ...  || ... || ...  || ... || ...
+
−
|-
+
−
| 6078h || 2    || N || R/W  || X15 || Sprite 15 X position
+
−
|-
+
−
| 607Ah || 2    || N || R/W  || Y15 || Sprite 15 Y position
+
−
|-
+
−
| 607Ch || 1    || N || W    || M15 || Sprite 15 magnification
+
−
|-
+
−
| 607Dh || 3    ||  ||      ||    || (unused)
+
−
|-
+
−
| colspan="6"|Block unused
+
−
|-
+
−
| 6400h || 2    || N || R/W  ||    || Colour palette, pen 0
+
−
|-
+
−
| 6402h || 2    || N || R/W  ||    || Colour palette, pen 1
+
−
|-
+
−
| ...  || ...  || ... || ...  || ... || ...
+
−
|-
+
−
| 641Eh || 2    || N || R/W  ||    || Colour palette, pen 15
+
−
|-
+
−
| 6420h || 2    || N || R/W  ||    || Colour palette, border
+
−
|-
+
−
| 6422h || 2    || N || R/W  ||    || Colour palette, sprite colour 1
+
−
|-
+
−
| 6424h || 2    || N || R/W  ||    || Colour palette, sprite colour 2
+
−
|-
+
−
| ...  || ...  || ... || ...  || ... || ...
+
−
|-
+
−
| 643Eh || 2    || N || R/W  ||    || Colour palette, sprite colour 15
+
−
|-
+
−
| colspan="6"|Block unused
+
−
|-
+
−
| 6800h || 1    || Y || W    || PRI  || Programmable raster interrupt scan line
+
−
|-
+
−
| 6801h || 1    || Y || W    || SPLT || Screen split scan line
+
−
|-
+
−
| 6802h || 2    || N || W    || SSA  || Screen split secondary start address
+
−
|-
+
−
| 6804h || 1    || Y || W    || SSCR || Soft scroll control register
+
−
|-
+
−
| 6805h || 1    || N || W    || IVR  || Interrupt Vector (Bit 0 set to 1 on reset)
+
−
|-
+
−
| 6806h ||      ||  ||      ||    || (unused)
+
−
|-
+
−
| 6808h || 1    ||  || R    || ADC0 || Analogue input channel 0
+
−
|-
+
−
| 6809h || 1    ||  || R    || ADC1 || Analogue input channel 1
+
−
|-
+
−
| 680Ah || 1    ||  || R    || ADC2 || Analogue input channel 2
+
−
|-
+
−
| 680Bh || 1    ||  || R    || ADC3 || Analogue input channel 3
+
−
|-
+
−
| 680Ch || 1    ||  || R    || ADC4 || Analogue input channel 4
+
−
|-
+
−
| 680Dh || 1    ||  || R    || ADC5 || Analogue input channel 5
+
−
|-
+
−
| 680Eh || 1    ||  || R    || ADC6 || Analogue input channel 6
+
−
|-
+
−
| 680Fh || 1    ||  || R    || ADC7 || Analogue input channel 7
+
−
|-
+
−
| colspan="6"|Block unused
+
−
|-
+
−
| 6C00h || 2    || N || W    || SAR0 || "DMA" channel 0 address pointer
+
−
|-
+
−
| 6C02h || 1    || N || W    || PPR0 || "DMA" channel 0 pause prescaler
+
−
|-
+
−
| 6C03h || 1    ||  ||      ||    || (unused)
+
−
|-
+
−
| 6C04h || 2    || N || W    || SAR1 || "DMA" channel 1 address pointer
+
−
|-
+
−
| 6C06h || 1    || N || W    || PPR1 || "DMA" channel 1 pause prescaler
+
−
|-
+
−
| 6C07h || 1    ||  ||      ||    || (unused)
+
−
|-
+
−
| 6C08h || 2    || N || W    || SAR2 || "DMA" channel 2 address pointer
+
−
|-
+
−
| 6C0Ah || 1    || N || W    || PPR2 || "DMA" channel 2 pause prescaler
+
−
|-
+
−
| 6C0Bh || 4    ||  ||      ||    || (unused)
+
−
|-
+
−
| 6C0Fh || 1    || Y || R/W  || DCSR || "DMA" control/status register
+
−
|-
+
−
| colspan="6"|Block unused
+
−
|}
+
−
 
+
−
POR column indicates whether a register has power on reset. A "N" indicates that the contents of a register are undefined at power on.
+
−
 
+
−
A colour in the palette is coded in 2 bytes:
+
−
* For first byte, bit7..4 is blue value, bit3..0 is red value
+
−
* For second byte, bit7..4 is ignored, bit3..0 is green value
+
−
 
+
−
Sprite magnification is coded in 1 byte:
+
−
* bit7..3 is ignored
+
−
* bit3..2 is X magnification (00 = not displayed, 01 = x1, 10 = x2, 11 = x4)
+
−
* bit1..0 is Y magnification (00 = not displayed, 01 = x1, 10 = x2, 11 = x4)
+
  
 
<br>
 
<br>
  
−
==Internal Links==
+
==Related pages==
  
 
*[[Arnold V specs]]
 
*[[Arnold V specs]]
 
*[[Arnold V Specs Revised]]
 
*[[Arnold V Specs Revised]]
−
 
−
<br>
 
  
 
[[Category:Programming]] [[Category:CPC Internal Components]]
 
[[Category:Programming]] [[Category:CPC Internal Components]]

Latest revision as of 07:23, 4 September 2024

This list shows only the internal standard I/O ports, as used in the BIOS ROM of the CPC 464/664/6128 BIOS, and in the AMSDOS ROM of the CPC 664/6128 and DDI-1. For a more complete list, including all Peripherals, see the Complete I/O Port Summary.


I/O Ports

I/O Decoded as Port Read Write
#7FXX %01xxxxxx xxxxxxxx Gate Array - Write
#7FXX %0xxxxxxx xxxxxxxx PAL extension to Gate Array for 128K RAM banking - Write
#BCXX %x0xxxx00 xxxxxxxx 6845 CRTC Index - Write
#BDXX %x0xxxx01 xxxxxxxx 6845 CRTC Data Out - Write
#BEXX %x0xxxx10 xxxxxxxx 6845 CRTC Status (as far as supported) Read -
#BFXX %x0xxxx11 xxxxxxxx 6845 CRTC Data In (as far as supported) Read -
#DFXX %xx0xxxxx xxxxxxxx Upper ROM Bank Number - Write
#EFXX %xxx0xxxx xxxxxxxx Printer Port - Write
#F4XX %xxxx0x00 xxxxxxxx 8255 PPI Port A (PSG Data) Read Write
#F5XX %xxxx0x01 xxxxxxxx 8255 PPI Port B (Vsync,PrnBusy,Tape,etc.) Read -
#F6XX %xxxx0x10 xxxxxxxx 8255 PPI Port C (KeybRow,Tape,PSG Control) - Write
#F7XX %xxxx0x11 xxxxxxxx 8255 PPI Control-Register - Write
#F8FF N/A Peripheral Soft Reset (MC_BOOT_PROGRAM and MC_START_PROGRAM do OUT [F8FF],FF) - Write
#FA7E %xxxxx0x0 0xxxxxxx Floppy Motor Control (for 765 FDC) - Write
#FADC %xxxxx0x0 xx0xxx00 Amstrad Serial Interface Z80-SIO / DART port A Data Register Read Write
#FADD %xxxxx0x0 xx0xxx01 Amstrad Serial Interface Z80-SIO / DART port A Control Reg. Read Write
#FADE %xxxxx0x0 xx0xxx10 Amstrad Serial Interface Z80-SIO / DART port B Data Register Read Write
#FADF %xxxxx0x0 xx0xxx11 Amstrad Serial Interface Z80-SIO / DART port B Control Reg. Read Write
#FB7E %xxxxx0x1 0xxxxxx0 765 FDC (internal) Status Register Read -
#FB7F %xxxxx0x1 0xxxxxx1 765 FDC (internal) Data Register Read Write
#FBDC %xxxxx0x1 xx0xxx00 Amstrad Serial Interface 8253 Timer counter 0 Read Write
#FBDD %xxxxx0x1 xx0xxx01 Amstrad Serial Interface 8253 Timer counter 1 Read Write
#FBDE %xxxxx0x1 xx0xxx10 Amstrad Serial Interface 8253 Timer counter 2 Read Write
#FBDF %xxxxx0x1 xx0xxx11 Amstrad Serial Interface 8253 Timer Modus Select - Write
  • The three 765 FDC floppy ports are contained in CPC 664/6128/Plus and DDI-1 only.
  • The eight Amstrad Serial Interface ports are pre-defined as shown above in the AMSDOS ROM. However, neither the CPC 664/6128/Plus nor DDI-1 do actually contain the corresponding RS232 hardware.
  • Bit14 of the PAL selection address must be at 1 on CPCs equipped with CRTCs 0/1/2. It can be at 0 or 1 on CRTCs 3/4. For compatibility reasons, it is strongly advised to always set bit14 to 1 to select PAL.
  • As components use partial address decoding, it is therefore possible to send the same value to different components simultaneously by carefully using custom I/O ports.


Memory Mapped I/O Ports

Mem Decoded as Port Read Write
#4000-7FFF %01xxxxxx xxxxxxxx ASIC - CPC+/GX4000 registers Read Write

See the ASIC page for details.


Related pages

Retrieved from "https://gryzor.info/index.php?title=Default_I/O_Port_Summary&oldid=118414"