Changes
/* uIDE-16 for the PCW */
=== uIDE-16 for the PCW ===
uIDE-16 needs slightly different settings to work on a PCW. It still needs to be configured for the base address '''C8''', but there are some extra steps:* First, set '''JP2''' to "'''8 bit'''".
* Now, set '''A15-A8''' to '''1, 1, 1, 1, 1, 1, 1, 0''' respectively. This coincides with the 6128 uIDE-16 I/O upper byte address (FE) and isn't really necessary as the setting is ignored when the card is in 8-bit address mode. But you need somewhere to keep the jumpers so they don't get lost...
* Finally, set '''A7-A3''' to '''A7=1, A6=1, A5=0, A4=0, A3=1'''.
