Changes
Initial page - my english needs to be polished!!!
Who doesn't know it: You want to load your favourite game, but you only get the "Disc missing" message from your CPC. Hmm, is the drive broken? No, in most cases you only have to change the drive belt. This is a step by step instruction on how to change the drive belt in a CPC6128. Changing the drive belt in other CPC types or the DD1 is nearly the same.
1.) Remove the screws in the case of the CPC. You have to remove all screws on the bottom on the CPC and both screws on the side of the CPC. Now you can turn down the upper part of the case (Warning: please remember that the keyboard is connected to the board of the CPC).
2.) After you removed the top of the case you see the internals of the CPC. You can now remove the two screws which are on the left side of the disc drive. You already removed the other two screws in the first step.
3.) Now you have to remove the cable of the power supply and the data cable from the disc drive. Be carefull not to break the pins of the connectors.
4.) After you removed the drive you can turn it around and remove the screws of the drive. On the right side you can find another two connectors (you can see them in the picture of the last step), which need to be removed to turn down the board of the disc drive.
5.) You can now turn down the board. The board is hooked to the faceplate of the drive, so remove it carefully.
Now the drive belt is easy to change...
1.) Remove the screws in the case of the CPC. You have to remove all screws on the bottom on the CPC and both screws on the side of the CPC. Now you can turn down the upper part of the case (Warning: please remember that the keyboard is connected to the board of the CPC).
2.) After you removed the top of the case you see the internals of the CPC. You can now remove the two screws which are on the left side of the disc drive. You already removed the other two screws in the first step.
3.) Now you have to remove the cable of the power supply and the data cable from the disc drive. Be carefull not to break the pins of the connectors.
4.) After you removed the drive you can turn it around and remove the screws of the drive. On the right side you can find another two connectors (you can see them in the picture of the last step), which need to be removed to turn down the board of the disc drive.
5.) You can now turn down the board. The board is hooked to the faceplate of the drive, so remove it carefully.
Now the drive belt is easy to change...
