* Test!
== External Reset Switch==
For the external reset button you will need a plug for the expansion connector. (a 50-way female edge connector for an English CPC).
* Locate the RESET pin at the plug (pin 41) * Solder one end of a piece of wire to the pin, and the other end to one of the pins on the push button. * Locate the GND pin at the plug (pin 2). * Solder one end of a piece of wire to the pin, and the other end to the other pin on the push button. * Switch the computer off * Connect the plug to the expansion connector * Switch the computer on * Test!
