Changes
/* Ready / Disk Changed signal */
This signal differs between floppy drives model:
*For 3inch floppy drives (pin26), it is a "Ready" signal. The /RDY signal is active whenever turns on when a disk is installed inserted and rotating spinning in the drive. After mounting a disk, this signal is active when after detecting at least 3 or more index pulses are detected. It turns off immediately if the disk is removed or the motor stops.
*For PC 3.5inch floppy drives (pin34), it is a "Disk Changed" signal. The /DSKCHG signal determines whether the same disk loaded during the previous disk access is still in the drive.
