Changes
* 3x capacitor 100nF
[[File:CPC6320 TriStripe top.jpg|thumb|none|CPC6320 TriStripe topTristripe parts (w/o RAM)]]
'''when using a PCB:'''
With the PCB you have to solder the ICs (except for the PAL) directly to the PCB as otherwise there is not enough headroom for the keyboard.
=== Preparation: Replace second RAM bank ===
[[File:CPC6320_bank2sockets.jpg|thumb|right|second ram bank removed, sockets in place]]
* desolder all RAM ICs of the second RAM bank (left one when looking from above). If you don't have the right tools to appropriately desolder the RAM ICs it can be easier to cut the legs and remove each leg. But of course, you will destroy the ICs with it.
