Changes
/* State machine */
Both components of Bootloader, it is to say SPI_MASTER and SDRAM_FAT32_LOADER components, does use several state-machines, one state-machine per process, each process communicating with another one using "MASTER/SLAVE" : the master state-machine does ask a slave to do something, and slave does notify master when its task is finished.
Using VHDL, I implements implement state-machine using a simple "switch case" on an '''integer'''. and before break I just change (increment...) this integer variable value, changing line of "switch case" this way.
This "switch case" is encalupsed on a "if do/done do/done do/done" instruction. "do" being a boolean from MASTER, and "done" being a boolean from SLAVE. Each MASTER against SLAVE component has a "do" (input if SLAVE component, output if MASTER component) and a "done" (input if MASTER component, output if SLAVE component) wire.
That's all. Like this you can run several sequential instructions, like reading and interpreting severals FAT32 variables using a SPI slaved component solving "read one byte at this address" instruction writen under a really low-level SDCARD protocol language.
