Changes

This guide is for people who own CPCs 664/6128 with 34 pin EDGE connector type interfaces (sold e.g. in the UK and DK).<br>

- a pc 3.5" floppy drive: For usable models see [[Drive_Compatibility]], [[Modify_PC_floppy_drives]] and [[Adding_3.5%22_drive_to_CPC464]].<br>

- ; Bad Command? : Floppy drive detected by cpc but is not powered. Recheck your powersupply is connected and working. - ; You turn on the cpc and both drives act-as-one .. and the floppy light is constantly on? : Most likely you didnt short pin 33 &amp; 34 : .. is the paperclip/wire loose? : .. or did you accidentally short pin 1 &amp; 2 instead? Try moving the paperclip to the other end of the connector. - ; Read error on drive? Disc hasnt been formatted yet? : Use software like Discology to quickly format drive B : .. or to quicky copy a disc from A to B : .. or make a test floppy on pc (see transfer bit later). - ; Disc is write protected error? : Make sure the write tab on the disc is down (move tab down on right side of disc).