Changes
[[Image:Fishertechnik robot 1.jpg|right|thumb|250px|The Fishertechnik Robot]]
== Technical ==
Connects to the [[Fischertechnik has built several interfaces:* C64/VIC20 probably required a custom interface (?)* Interface for one-directional printer port ]] (used on PCs) (this might have been also used by CPC ?)* Interface see there for RS232 port (used on PCs) (9600 baud, 8bit, no parity, 1 stopbit)* Interface for USB port (used on PCs) === Parallel Printer Port Interface === Designed for one-directional printer ports: Data is read via BUSY line (which data is to be read is selected via DATA lines) (details on how the data is transferred exactly are unknown?). Printer Pin Interface Signal Pin2 (Data Bit0) Load-out Pin3 (Data Bit1) load-in Pin4 (Data Bit2) Data-out Pin5 (Data Bit3) Clock Pin6 (Data Bit4) Trigger-x Pin7 (Data Bit5) Trigger-y Pin11 (Busy) Data/caunt-in
== Reviews ==
The robot trainingsrobot was reviewed in the danish magazine [[Amstradbladet 1986, Issue 3/4]] (page 4-6)
== Pictures ==
<gallery caption="Fischertechnik robotTrainingsrobot">Image:Trainingsrobot Schneider.jpg|Schneider Cassette
Image:Fishertechnik robot 2.jpg|The manual
Image:Fishertechnicrobot.jpg|Robot in closeup
== Weblinks ==
* http://www.fischer.de/ '''fischer group ''' homepage(german and english)* http://www.fischertechnik.de/ '''fischertechnik''' homepage (german and english)
[[Category:HardwareRobotic]] [[Category:Peripherals]] [[Category:Stub]]