Difference between revisions of "CPC M4 xfer tool"
(Created page with "Command-line tool that allow to send files and receive from an M4 Board. Possibility to add an AMSDOS header too. Current version : 2.0.0 == Commands == {| class="wikitable...") |
|||
| Line 2: | Line 2: | ||
Current version : 2.0.0 | Current version : 2.0.0 | ||
| + | |||
| + | Windows Executable : [[Media:Xfer.zip|Xfer.zip]] | ||
== Commands == | == Commands == | ||
Revision as of 10:48, 6 February 2017
Command-line tool that allow to send files and receive from an M4 Board. Possibility to add an AMSDOS header too.
Current version : 2.0.0
Windows Executable : Xfer.zip
Commands
| Command | Effect |
|---|---|
| xfer -u ipaddr file path opt | Upload file, opt 0: no header add, 1: add ascii header |
| xfer -d ipaddr file path opt | Download file, opt 0: leave header, 1: remove header |
| xfer -f ipaddr file slot name | Upload rom |
| xfer -x ipaddr path+file | Execute remote file |
| xfer -s ipaddr | Reset CPC |
| xfer -r ipaddr | Reboot M4 |
Example : If your m4 has IP number 192.168.1.11, the following code will run zynaps from given directory.
xfer -x 192.168.1.11 /games/zynaps/zynapsex.bas
Want to leave it again you could reset the cpc by:
xfer -s 192.168.1.11
In a development environment the idea is you ie. do the following to your makefile :
xfer -u 192.168.1.11 mycode.bin / 0 (to upload the file after compilation, additional files could be uploaded too)
xfer -x 192.168.1.11 /mycode.bin (to execute it)
If you are deving roms, they can be remotely uploaded too :
xfer -f 192.168.1.11 yancc.rom 3 "YANCC" (upload to slot 3)
xfer -f 192.168.1.11 launcher.rom 4 "The Launcher" (upload to slot 4)
xfer -r 192.168.1.11 (Reboot M4 for changes to take effect)
