Difference between revisions of "KDS Electronics"
From CPCWiki - THE Amstrad CPC encyclopedia!
Line 14: | Line 14: | ||
* [[RAMDOS]] and [[ROMDOS]] (later resold by [[Siren Software]]) | * [[RAMDOS]] and [[ROMDOS]] (later resold by [[Siren Software]]) | ||
+ | |||
+ | == Unidentified Hardware == | ||
+ | |||
+ | [[Image:KDS.jpg|right|thumb|250px|KDS Interface for the Amstrad]] | ||
+ | '''KDS Interface for the Amstrad''' - there is some confusion on this device. | ||
+ | * Some people say it'd be a serial interface - this may be true, but it's definetly NOT the [[KDS Electronics Serial Interface]] (which has a 50pin connector). | ||
+ | * The device looks quite similar to the [[KDS 8-Bit Printer Port]] but with an additional cable attached to it, which isn't attached (or isn't visible) on the 8bit port photo, [[Media:KDS8Bit.jpg]]. | ||
+ | Actually, the [[KDS 8-Bit Printer Port]] should require a similar cable (for 5V power supply, which isn't available on the CPCs 34pin printer port). So quite possibly likely, The "KDS Interface" and "KDS 8-Bit Printer Port" are the same hardware, and do both have the cable, but with the cable being not visible on one of the photos for whatever reason. |
Revision as of 06:50, 24 July 2010
A UK-based hardware firm.
Hardware
- KDS Serial Interface
- KDS Power Controller
- KDS 5 1/4" Disc Drive?
- KDS 8-Bit Printer Port
- KDS ROM Board
- Mini-Max Modem
Software
- RAMDOS and ROMDOS (later resold by Siren Software)
Unidentified Hardware
KDS Interface for the Amstrad - there is some confusion on this device.
- Some people say it'd be a serial interface - this may be true, but it's definetly NOT the KDS Electronics Serial Interface (which has a 50pin connector).
- The device looks quite similar to the KDS 8-Bit Printer Port but with an additional cable attached to it, which isn't attached (or isn't visible) on the 8bit port photo, Media:KDS8Bit.jpg.
Actually, the KDS 8-Bit Printer Port should require a similar cable (for 5V power supply, which isn't available on the CPCs 34pin printer port). So quite possibly likely, The "KDS Interface" and "KDS 8-Bit Printer Port" are the same hardware, and do both have the cable, but with the cable being not visible on one of the photos for whatever reason.