Difference between revisions of "SYMBiFACE II"
(Redirecting to Symbos) |
(Own page for the Symbiface) |
||
| Line 1: | Line 1: | ||
| − | + | == Introduction == | |
| + | |||
| + | In autumn 2004 Dr.Zed developed with the support of TFM, Octoate and Tolkin the first CPC SYMBiFACE also known as "CPC-IDE". It was the first hardware solution in history of CPC, which connected IDE-harddrives and CF-cards to the CPC with the maximum possible data transfer speed. | ||
| + | |||
| + | It was fully working, but still had a prototype state, so only 10 pieces have been produced. Some people should write software first, before the final version would be released. So fully IDE-support for FAT16 and FAT32 harddiscs has been implemented in SymbOS until Xmas 2004. | ||
| + | |||
| + | CPC SYMBiFACE II is not only an IDE interface anymore. It merges the CPC with actual PC technology. It provides nearly everything you need to change your CPC into a powerful work station! | ||
| + | |||
| + | |||
| + | == Features == | ||
| + | |||
| + | CPC SYMBiFACE II contains the optimal solution for connecting a CPC with an IDE harddisc. It provides the maximum - both for the performance and for the simpleness in accessing the harddisc. | ||
| + | |||
| + | ''IDE Features'' | ||
| + | |||
| + | * Supports IDE-Harddiscs with up to 128GB | ||
| + | * Bigger HDDs or CD/DVD drives support possible with drivers | ||
| + | * Simultaneous operation of two harddiscs (master and slave):for a total of up to 256GB on your CPC! | ||
| + | * Transfer speed of 162KByte/s: That's as fast as copying memory inside the CPC with LDIR. In practice (loading FAT16/32 files) the speed is still about 130KB/s (SymbOS-FAT-driver). | ||
| + | * External power supply required: no extra load for the CPC's internal PSU | ||
| + | * No timing problems: Interrupts don't need to be disabled during the data transfer with the harddisc. The harddisc can operate while you play sound or doing other things with your CPC (multitasking etc.). | ||
| + | * Traffic activity display via a LED on the board | ||
| + | |||
| + | '' Additional Features'' | ||
| + | |||
| + | * 512KB RAM extension, which is fully compatible with the CPC [[6128]] and the [[dk'tronics]] ram extension | ||
| + | * 512KB rewriteable ROM. You can upload up to 32 ROMs, which are persistant. You can also use the ROM space as an additional RAM extension. ROMs can be switched on or off via switches or via software. | ||
| + | * PS/2 mouse connector. This makes it possible to connect wireless and optical mouses to your CPC. | ||
| + | * Realtime clock, which is fully PC compatible and provides additional 128 byte persistant RAM, which can be used to store config data. | ||
Revision as of 16:12, 4 August 2006
Introduction
In autumn 2004 Dr.Zed developed with the support of TFM, Octoate and Tolkin the first CPC SYMBiFACE also known as "CPC-IDE". It was the first hardware solution in history of CPC, which connected IDE-harddrives and CF-cards to the CPC with the maximum possible data transfer speed.
It was fully working, but still had a prototype state, so only 10 pieces have been produced. Some people should write software first, before the final version would be released. So fully IDE-support for FAT16 and FAT32 harddiscs has been implemented in SymbOS until Xmas 2004.
CPC SYMBiFACE II is not only an IDE interface anymore. It merges the CPC with actual PC technology. It provides nearly everything you need to change your CPC into a powerful work station!
Features
CPC SYMBiFACE II contains the optimal solution for connecting a CPC with an IDE harddisc. It provides the maximum - both for the performance and for the simpleness in accessing the harddisc.
IDE Features
- Supports IDE-Harddiscs with up to 128GB
- Bigger HDDs or CD/DVD drives support possible with drivers
- Simultaneous operation of two harddiscs (master and slave):for a total of up to 256GB on your CPC!
- Transfer speed of 162KByte/s: That's as fast as copying memory inside the CPC with LDIR. In practice (loading FAT16/32 files) the speed is still about 130KB/s (SymbOS-FAT-driver).
- External power supply required: no extra load for the CPC's internal PSU
- No timing problems: Interrupts don't need to be disabled during the data transfer with the harddisc. The harddisc can operate while you play sound or doing other things with your CPC (multitasking etc.).
- Traffic activity display via a LED on the board
Additional Features
- 512KB RAM extension, which is fully compatible with the CPC 6128 and the dk'tronics ram extension
- 512KB rewriteable ROM. You can upload up to 32 ROMs, which are persistant. You can also use the ROM space as an additional RAM extension. ROMs can be switched on or off via switches or via software.
- PS/2 mouse connector. This makes it possible to connect wireless and optical mouses to your CPC.
- Realtime clock, which is fully PC compatible and provides additional 128 byte persistant RAM, which can be used to store config data.
