Difference between revisions of "AMSDOS Header"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
Line 17: Line 17:
 
| 17 || Last block || Tape only, set to 0
 
| 17 || Last block || Tape only, set to 0
 
|-
 
|-
| 18 || File type || Bit0 = Protection (set if protected)
+
| 18 || File type || As per cassette: Bit0 = Protection (set if protected)
  
 
Bits1..3 = File contents (0:BASIC, 1:Binary, 2:Screen image, 3:ASCII, 4..7 are unallocated)
 
Bits1..3 = File contents (0:BASIC, 1:Binary, 2:Screen image, 3:ASCII, 4..7 are unallocated)
Line 23: Line 23:
 
Bits4..7 = Version (ASCII files should be version 1, all other files should be version 0)
 
Bits4..7 = Version (ASCII files should be version 1, all other files should be version 0)
 
|-
 
|-
| 19..20 || Data length || The number of data bytes in the data record. As per cassette
+
| 19..20 || Data length || As per cassette: the number of data bytes in the data record
 
|-
 
|-
| 21..22 || Data location || Where the data was written from originally. As per cassette
+
| 21..22 || Data location || As per cassette: where the data was written from originally
 
|-
 
|-
 
| 23 || First block || Set to #FF, only used for output files
 
| 23 || First block || Set to #FF, only used for output files
 
|-
 
|-
| rowspan="3" | User || 24..25 || Logical length || Actual file length is here. As per cassette
+
| rowspan="3" | User || 24..25 || Logical length || As per cassette: actual file length is here
 
|-
 
|-
| 26..27 || Entry address || The execution address for machine code programs. As per cassette
+
| 26..27 || Entry address || As per cassette: the execution address for machine code programs
 
|-
 
|-
 
| 28..63 || Unused || As per cassette
 
| 28..63 || Unused || As per cassette

Revision as of 05:20, 15 October 2024

In AMSDOS it is possible to store files in two ways: headerless and with a header. Headerless files are often files which were created with OPENOUT and SAVE"filename",a. Programs normally have a file header, which consist of 128 bytes and contain the following data:

Field Bytes Name Notes
System 0 User number 0-15, or #E5 for deleted entries
1..8 Filename Unused characters are filled with space
9..11 Extension Unused characters are filled with space
12..15 Zero Contains all zeroes
16 Block number Tape only, set to 0
17 Last block Tape only, set to 0
18 File type As per cassette: Bit0 = Protection (set if protected)

Bits1..3 = File contents (0:BASIC, 1:Binary, 2:Screen image, 3:ASCII, 4..7 are unallocated)

Bits4..7 = Version (ASCII files should be version 1, all other files should be version 0)

19..20 Data length As per cassette: the number of data bytes in the data record
21..22 Data location As per cassette: where the data was written from originally
23 First block Set to #FF, only used for output files
User 24..25 Logical length As per cassette: actual file length is here
26..27 Entry address As per cassette: the execution address for machine code programs
28..63 Unused As per cassette
AMSDOS 64..66 Real length Length of the file in bytes, excluding the header record. 24 bit number, least significant byte first. Just a copy, not used!
67..68 Checksum Unsigned sum of all bytes until this field
69..127 Unused


These headers are detected by checksumming the first 67 bytes of the record. If the checksum is as expected then a header is present, if not then there is no header.

To calculate the checksum, just add all bytes from 00 up to and including byte 66 together.

This is only a summary. All details are in Firmware Guide chapter 9, page 4.