Difference between revisions of "Amstrad CSD"

Revision as of 10:52, 25 July 2012

The Amstrad CSD was a machine that was in-store to demonstrate the hardware of the Amstrad plus.

It had a system cartridge which contained a menu, and could hold a furthur 12 cartridges.

It has additional hardware to allow switching of cartridges.

The information was derived from the software. It is not completely accurate. Lots of information is not known at this time.

It uses ports fbe0-fbe3. The exact decoding of these ports is unknown.

fbe0 is read only it seems

bits 7..4 seem to be related to the dip switches on the CSD

bit 7 seems to be fixed to GND/0v.
bit 6,5 is the timer value. It is the time allowed between choosing next cartridge to play.

bit 6, bit 5

off off = 8			1 1
off on = 16			1 0
on off = 24			0 1
on on = 32 			0 0

bit 4 seems to be timer on/off for time limited play. fbe0 bits 3..0 are defined by the dial bit 3 is ignored.

0 = forever?
1 = 8s,
2 = 56s

fbe2 is read only it seems bits 7..3 are the currently selected cartridge bits 3..0 ???

fbe1 is writeable bits 7,6: ??? bits 5..0: are cartridge number??

fbe3 is writeable: bits 7..4: are cartridge number bits 3..0: ???

Courtesy of Amstrad.cpc.free.fr

Revision as of 10:48, 25 July 2012 (view source) MacDeath (Talk \| contribs) ← Older edit		Revision as of 10:52, 25 July 2012 (view source) MacDeath (Talk \| contribs) Newer edit →
Line 55:		Line 55:
	Courtesy of Amstrad.cpc.free.fr		Courtesy of Amstrad.cpc.free.fr

−	[[Category:Hardware]][[Category:CPC Plus]][[Category:Amstrad Products]][[Category:Cartridges]]	+	[[Category:Hardware]][[Category:CPC Plus]][[Category:Amstrad Products]][[Category:Cartridges]][[Category:Expansion ROM]]