Difference between revisions of "Schneiderware Basisplatine"
(Created page with "The Schneiderware series consists of several DIY projects which have been released in german magazine CPC Schneider International published by DMV. The name "Schneide...") |
|||
Line 1: | Line 1: | ||
− | The [[Schneiderware]] | + | The [[Schneiderware Basisplatine]] (backplane) is some kind of a [[ECB-Bus]] motherboard for the [[Schneiderware]] DIY series, which was published by german magazine [[CPC Schneider International]]. The board has five 64-pin ECB sockets (for use with the DIY boards of the series), a 50-pin connector (for the CPC expansion port), and 7 soldering points (for an optional power supply, like the [[Schneiderware Power Supply]]). |
− | The | + | The plain PCB, or the fully assembled board were available via mail-order. Unlike as for the other DIY projects of the Schneiderware series, the PCB layout has not been printed (in paper-form) in the magazine (though the magazine offered to send them to interested persons). Another solution would have been to buy a standard ECB backplane (like [[:File:Reichelt Euro-Bus-Karte.jpg|this]]), and to build an adaptor for the CPC expansion port by hand. |
* [[Schneiderware Basisplatine|Schneiderware #2a Basisplatine (Motherboard)]] (7/1986 pages 60-67) | * [[Schneiderware Basisplatine|Schneiderware #2a Basisplatine (Motherboard)]] (7/1986 pages 60-67) |
Revision as of 14:52, 30 September 2010
The Schneiderware Basisplatine (backplane) is some kind of a ECB-Bus motherboard for the Schneiderware DIY series, which was published by german magazine CPC Schneider International. The board has five 64-pin ECB sockets (for use with the DIY boards of the series), a 50-pin connector (for the CPC expansion port), and 7 soldering points (for an optional power supply, like the Schneiderware Power Supply).
The plain PCB, or the fully assembled board were available via mail-order. Unlike as for the other DIY projects of the Schneiderware series, the PCB layout has not been printed (in paper-form) in the magazine (though the magazine offered to send them to interested persons). Another solution would have been to buy a standard ECB backplane (like this), and to build an adaptor for the CPC expansion port by hand.
- Schneiderware #2a Basisplatine (Motherboard) (7/1986 pages 60-67)