Difference between revisions of "8bit Printer Ports"
(→Happy Computer 8bit Printer Port upgrade (DIY)) |
m (→Happy Computer 8bit Printer Port upgrade (DIY): - added CPCAI issue) |
||
| Line 12: | Line 12: | ||
* For details see: [[Happy Computer 8bit Printer Mod]] | * For details see: [[Happy Computer 8bit Printer Mod]] | ||
| + | |||
| + | The same way to upgrade the CPC printer port to 8bit is also described in the CPC Amstrad International issue 8/9'91. | ||
=== 8bit Printer Port in KC Compact === | === 8bit Printer Port in KC Compact === | ||
Revision as of 17:10, 5 March 2010
The CPC Printer Port has only 7bit data. Which is okay for english 7bit ASCII character sets, but not enough for 8bit character sets. Also, printing bitmap graphics usually requires 8bit data (though Amstrads own printers are probably working with 7bit).
Contents
Internal 8bit Printer Ports/Mods
Happy Computer 8bit Printer Port upgrade (DIY)
A good method to upgrade to full 8bit has been described in the german magazine "Happy Computer Sonderheft 2/85 and 4/86":
- Disconnect the D7 pin from ground, and wire it to the PIOs Tape WR DATA pin instead (That is, Pin 12 of the 8255 chip).
Sharing that pin will cause no problems (as long as you do not attempt to send data to the tape drive and to printer at the same time). Of course, you will also have to customize your software, or BIOS ROM, or the BIOS jump vectors in RAM, in order to take advantage of the modification.
- For details see: Happy Computer 8bit Printer Mod
The same way to upgrade the CPC printer port to 8bit is also described in the CPC Amstrad International issue 8/9'91.
8bit Printer Port in KC Compact
The KC Compact uses the Bit5 of PPI Port C as 8th printer bit (this is same as the Happy Computer mod, see above).
8bit Printer Port in Aleste 520EX
The Aleste 520EX includes an 8bit printer port, using PSG Ext Port B for data (which does not exist on the CPC), and PPI port C, Bit 4 for strobe (which would be Tape Motor in CPC). The Aleste doesn't have the normal CPC-style Printer Port at Port EFXXh.
8bit Printer Port in CPC Plus
In the CPC Plus, Bit 3 of CRTC Register 0Ch can be used as eighth printer bit. For compatibility to normal CPCs, this feature can be disabled by removing the 10kOhm resistor R30 on the mainboard (aka R130 in the schematic). See LK Links for more info.
External Printer Ports
- 8bit Printer Port (Amstrad Action) (DIY) - connects to Expansion Port (uses Port FBF8h/FBF9h)
- 8bit Printer Port (Paul Bauriedl) (DIY) - connects to Printer Port (splits port EFxxh to 2x4bit)
- CPCISA by Yarek can be used with various ISA bus printer cards (8bit, one- or bi-directional types, SPP, XPP, EPP, etc.)
Also, reportedly, the following external hardware exists:
- Communicator 104 (KDS Electronics) (1992) Reportedly: "Serial and Parallel interface" (or, actually, Mini-Max Modem)
- 8bit Printer Port (KDS Electronics) (this may be same as above)
- 8bit Printer Port (Pride Utilities) (details)
- 8bit Printer Port with Dual RS232 (Timatic Systems)
There's nothing else known about that hardware.
Unknown Solutions
- CPCI - german magazine "CPC Schneider International 12/1985" contains something about 8th bit - unknown if this is an internal mod, or external adapter or whatever?
