Difference between revisions of "Connector:Printer port"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→CPC Plus Pinout) |
|||
| Line 38: | Line 38: | ||
{|{{Prettytable|width: 700px; font-size: 2em;}} | {|{{Prettytable|width: 700px; font-size: 2em;}} | ||
| − | |''Pin No. | + | |''Pin No.''||''CPC+''||''PC'' |
|- | |- | ||
| − | | 1 || STROBE || | + | | 1 || /STROBE ||/STROBE |
|- | |- | ||
| − | | 2 || Data 0 | + | | 2 || Data 0 ||Data 0 |
|- | |- | ||
| − | | 3 || Data 1 | + | | 3 || Data 1 ||Data 1 |
|- | |- | ||
| − | | 4 || Data 2 | + | | 4 || Data 2 ||Data 2 |
|- | |- | ||
| − | | 5 || Data 3 | + | | 5 || Data 3 ||Data 3 |
|- | |- | ||
| − | | 6 || Data 4 | + | | 6 || Data 4 ||Data 4 |
|- | |- | ||
| − | | 7 || Data 5 | + | | 7 || Data 5 ||Data 5 |
|- | |- | ||
| − | | 8 || Data 6 | + | | 8 || Data 6 ||Data 6 |
|- | |- | ||
| − | | 9 || Data 7 | + | | 9 || Data 7 ||Data 7 |
|- | |- | ||
| − | | | + | | 10 || NC ||/ACK |
|- | |- | ||
| − | | 16 || +5V | + | | 11 || BUSY ||BUSY |
| + | |- | ||
| + | | 12 || NC ||PaperEnd | ||
| + | |- | ||
| + | | 13 || NC ||SLCT | ||
| + | |- | ||
| + | | 14 || NC ||/AutoLF | ||
| + | |- | ||
| + | | 15 || NC ||/Error | ||
| + | |- | ||
| + | | 16 || +5V ||/Init | ||
| + | |- | ||
| + | | 17 || GND ||/Select | ||
| + | |- | ||
| + | |18-25|| GND ||GND | ||
|- | |- | ||
|} | |} | ||
| − | + | ||
[[Category:Hardware]][[Category:CPC Internal Components]] | [[Category:Hardware]][[Category:CPC Internal Components]] | ||
Revision as of 21:52, 28 January 2010
Classic CPC Pinout
| Pin No. (CPC) | Description | Pin No. (CPC) | Description |
| 1 | STROBE | 19 | GND |
| 2 | Data 0 | 20 | GND |
| 3 | Data 1 | 22 | GND |
| 4 | Data 2 | 23 | GND |
| 5 | Data 3 | 24 | GND |
| 6 | Data 4 | 25 | GND |
| 7 | Data 5 | 26 | GND |
| 8 | Data 6 | 28 | GND |
| 9 | GND | 33 | GND |
| 11 | BUSY | ||
| 14 | GND | ||
| 16 | GND |
There is no pin 18 to get a centronics-compatible pin numbering. Ie. although the CPC uses a 34pin edge connector, the pins are numbered as on a 36pin centronics connector.
As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see 8bit Printer Ports.
CPC Plus Pinout
| Pin No. | CPC+ | PC |
| 1 | /STROBE | /STROBE |
| 2 | Data 0 | Data 0 |
| 3 | Data 1 | Data 1 |
| 4 | Data 2 | Data 2 |
| 5 | Data 3 | Data 3 |
| 6 | Data 4 | Data 4 |
| 7 | Data 5 | Data 5 |
| 8 | Data 6 | Data 6 |
| 9 | Data 7 | Data 7 |
| 10 | NC | /ACK |
| 11 | BUSY | BUSY |
| 12 | NC | PaperEnd |
| 13 | NC | SLCT |
| 14 | NC | /AutoLF |
| 15 | NC | /Error |
| 16 | +5V | /Init |
| 17 | GND | /Select |
| 18-25 | GND | GND |
