Difference between revisions of "Amsteam ROMBox"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Flash utility usage) |
(→Flash utility usage) |
||
| Line 11: | Line 11: | ||
==== Flash utility usage ==== | ==== Flash utility usage ==== | ||
| − | |FLASH,"filename",slot | + | '''|FLASH,"filename",slot''' |
Where filename is a file from CPC disc, slot is a number from 0 to 6. | Where filename is a file from CPC disc, slot is a number from 0 to 6. | ||
| Line 19: | Line 19: | ||
The rest of slots are enabled with the ''enable'' DIP switch. | The rest of slots are enabled with the ''enable'' DIP switch. | ||
| − | |FLASHLOW,"filename" | + | '''|FLASHLOW,"filename"''' |
Same than |FLASH command but for lower ROM replacement. It's also enabled with the ''boot'' DIP switch. | Same than |FLASH command but for lower ROM replacement. It's also enabled with the ''boot'' DIP switch. | ||
| + | |||
| + | Notice that this command doesn't require the slot number, since there is only one lower slot. | ||
'''Important''': In both commands, an empty filename means to clear the slot. | '''Important''': In both commands, an empty filename means to clear the slot. | ||
Revision as of 12:09, 13 June 2024
Amsteam ROMBox
Software
Flash utility usage
|FLASH,"filename",slot
Where filename is a file from CPC disc, slot is a number from 0 to 6.
Slot 0 is the BASIC slot enabled with the boot DIP switch.
The rest of slots are enabled with the enable DIP switch.
|FLASHLOW,"filename"
Same than |FLASH command but for lower ROM replacement. It's also enabled with the boot DIP switch.
Notice that this command doesn't require the slot number, since there is only one lower slot.
Important: In both commands, an empty filename means to clear the slot.
|LIST
This command lists the current slot assignments for both lower and upper ROMs.
Important: After running any of the commands all the slots will be disabled until a power down is performed.
