Difference between revisions of "Read error codes"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Initial version out of forum) |
(No difference)
|
Latest revision as of 06:12, 28 January 2011
Read error codes are presented when using tape with Amstrad CPC computers. The possible read error codes are:
- Read error a: The signal is dropped or timing is incorrect.
- Read error b: CRC error.
- Read error c: Invalid file type / seems to be used with "CAS CHECK". This is where you are comparing data in memory with data written to tape. So effectively a verify that data was written correctly.
- Read error d: Block is too large to fit in the buffer. (given when you do a CAT on large blocks)
