Difference between revisions of "DIY Cartridge"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Created page with "=== Description === The file below is the PCB Layout for a standard plus cartridge with a few minor changes: - No LKs are bridged by default - LKs use standard PCB jumpers for...") |
(No difference)
|
Revision as of 15:15, 30 November 2010
Description
The file below is the PCB Layout for a standard plus cartridge with a few minor changes:
- No LKs are bridged by default
- LKs use standard PCB jumpers for quick swapping
- All vias are done at component pins to reduce drilling and soldering
The PCB dimensions are identical to an original cartridge and will fit in the original housing.
Components should be mounted on the side with the ground plain.
The Layout file is as always mirror imaged.
Pictures of a finished part to follow soon.
File:Cartridge Layout.pdf - PCB Track Layout
Bryce.
