Difference between revisions of "Schneiderware V/24 Interface"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Created page with "The Schneiderware V/24 Interface is a RS232 Interface, published by german magazine CPC Schneider International as part of their Schneiderware DIY series. The pla...") |
(No difference)
|
Revision as of 08:31, 30 September 2010
The Schneiderware V/24 Interface is a RS232 Interface, published by german magazine CPC Schneider International as part of their Schneiderware DIY series. The plain PCB, or the fully assembled board were also available via mail-order.
The ECB Bus connector of the board is intended to be plugged into the Schneiderware Basisplatine, but it could be also wired directly to the CPCs Expansion Port. The V/24 board additionally requires a Schneiderware Power Supply (or another external power supply with +12V/-12V).
- Schneiderware #3 V/24 (RS232 Interface) (8/1986 pages 70-77, plus correction from 9/1986 page 80)
I/O Ports
| Address (default) | Address (alternate) | Usage |
| F9E0h | F9E2h | Schneiderware V/24 8251 USART Data |
| F9E1h | F9E3h | Schneiderware V/24 8251 USART Control |
| F9ECh | F9E8h | Schneiderware V/24 8253 Timer 0 (TX clock) |
| F9EDh | F9E9h | Schneiderware V/24 8253 Timer 1 (RX clock) |
| F9EEh | F9EAh | Schneiderware V/24 8253 Timer 2 (unused) |
| F9EFh | F9EBh | Schneiderware V/24 8253 Timer Control Note: Timer clock input is jumper select-able: 2MHz (default), or 1MHz |
Pictures
V/24 Schematic
V/24 (component side)
V/24 (solder side)
.jpg)
.jpg)
