Difference between revisions of "Robotron 6313"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Manual) |
(→Manual) |
||
| Line 55: | Line 55: | ||
<td>5-1</td><td>case contact</td><td>don't use</td> | <td>5-1</td><td>case contact</td><td>don't use</td> | ||
<tr> | <tr> | ||
| − | <td>5-2</td><td> | + | <td>5-2</td><td>not used</td><td></td><td></td> |
<tr> | <tr> | ||
<td>6-1</td><td>paper end contact</td><td>active</td><td>inactive</td> | <td>6-1</td><td>paper end contact</td><td>active</td><td>inactive</td> | ||
| Line 61: | Line 61: | ||
<td>6-2</td><td>buzzer</td><td>active</td><td>inactive</td> | <td>6-2</td><td>buzzer</td><td>active</td><td>inactive</td> | ||
<tr> | <tr> | ||
| − | <td>7-1</td><td>autom. line feed</td><td>no LF on CR</td><td>autom. LF on CR</td> | + | <td>7-1</td><td>autom. line feed (LF)</td><td>no LF on CR</td><td>autom. LF on CR</td> |
<tr> | <tr> | ||
| − | <td>7-2</td><td> | + | <td>7-2</td><td>autom. carriage return (CR)</td><td>autom. CR on LF</td><td>no CR on LF</td> |
<tr> | <tr> | ||
<td>8-1</td><td>character set</td><td>Set 2</td><td>Set 1 (incl. umlauts)</td> | <td>8-1</td><td>character set</td><td>Set 2</td><td>Set 1 (incl. umlauts)</td> | ||
Revision as of 16:59, 31 August 2006
The Robotron 6313 printer was a 9-needle dot matrix printer manufactured by the VEB Robotron (East Germany)
What made it special and worth mentioning in the CPC-Wikipedia is the fact that it could be DIP-switched to be 100% compatible with the Amstrad/Schneider NLQ401, that means it could print the whole CPC character set and understood the code sequence to switch the 8th bit.
In Western Germany it was sold under the names
Präsident 6313
or
Europrint FT80X
Technical Specs.
| Mechanical data (excerpts) | |
| print principle: | serial dot matrix printer with pin system |
| print speed: | 100cps |
| print direction: | bidirectional with logical optimization for the print head movement |
| number of pins: | 9 |
| copies: | 1 original plus 2 carbon copies overall thickness max. 0.3mm max. areal weigth 80g/m² |
| printer cassette: | type 615 FBK 1 Tally 1000 or equivalent |
| Electrical data | |
| input voltage: | 220V +10%/-15% 110V +10%/-15% |
| frequency: | 47-63Hz |
| power consumption: | max. 70W |
| Environmental conditions | |
| temperature: | 10-35°C |
| rel. humiditity: | 40-90% |
| noise level: | max. 58.5dB (AS) |
Weblinks
Manual
| Setting DIL switches | |||
| Nr. | Function | OFF | ON |
| 5-1 | case contact | don't use | |
| 5-2 | not used | ||
| 6-1 | paper end contact | active | inactive |
| 6-2 | buzzer | active | inactive |
| 7-1 | autom. line feed (LF) | no LF on CR | autom. LF on CR |
| 7-2 | autom. carriage return (CR) | autom. CR on LF | no CR on LF |
| 8-1 | character set | Set 2 | Set 1 (incl. umlauts) |
| 8-2 | buffer full condition | print+LF | print only |
| 9-1 | CANcel mode | valid | invalid |
| 9-2 | character codes | IBM | Schneider |
| 10-1 10-2 | font | see table 1 | |
| 11-1 | Zero | O | slashed 0 |
| 11-2 | line feed | 1/6 inch | 1/8 inch |
| 12-1 12-2 | paper format | See table 2 | |
| 13-1 | 1 inch feed over paper edge | active | inactive |
| 13-2 | control codes compatible with | IBM/Schneider | EPSON |
| 14-1 | NLQ | inactive | active |
| 14-2 | Function | OFF | ON |
| 15-1 | Function | OFF | ON |
| 15-2 | Function | OFF | ON |
| 16-1 .. 18-2 | no function |
