Difference between revisions of "Keyboard Membrane Repair/Replacement Guide"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
Line 2: Line 2:
  
 
The east-german CPC clone [[KC Compact]] and apparently at least [[:Image:Datamedia_sp64_2.jpg|early CPC 464s]] as well contain a more robust real keyboard circuit board, which should give it an infinite lifetime.
 
The east-german CPC clone [[KC Compact]] and apparently at least [[:Image:Datamedia_sp64_2.jpg|early CPC 464s]] as well contain a more robust real keyboard circuit board, which should give it an infinite lifetime.
 +
 +
== Cleaning ==
 +
 +
Dual-foil membrane keyboards (as found in CPC 6128, CPC Plus, and 3rd generation CPC 464 keyboards) often only need to be cleaned.
  
 
== Repair ==
 
== Repair ==
  
−
There is no chance to repair broken wires on the membrane by soldering (either the wire vaporizes, or the foil melts). However, one can ''repaint'' broken wires using conductive silver, which is sold as:
+
Broken wires are most often causing problems on single-foil keyboards (as found in CPC 664, and 2nd generation CPC 464 keyboards). There is no chance to repair broken wires on the membrane by soldering (either the wire vaporizes, or the foil melts). However, one can '''repaint''' broken wires using conductive silver, which is sold as:
 
* English: conductive silver (or conductive paint)
 
* English: conductive silver (or conductive paint)
 
* German: Leitsilber
 
* German: Leitsilber

Revision as of 16:14, 25 April 2010

The CPC keyboards contain fragile keyboard membranes, which have a rather low lifetime of maybe 5-10 years.

The east-german CPC clone KC Compact and apparently at least early CPC 464s as well contain a more robust real keyboard circuit board, which should give it an infinite lifetime.

Cleaning

Dual-foil membrane keyboards (as found in CPC 6128, CPC Plus, and 3rd generation CPC 464 keyboards) often only need to be cleaned.

Repair

Broken wires are most often causing problems on single-foil keyboards (as found in CPC 664, and 2nd generation CPC 464 keyboards). There is no chance to repair broken wires on the membrane by soldering (either the wire vaporizes, or the foil melts). However, one can repaint broken wires using conductive silver, which is sold as:

  • English: conductive silver (or conductive paint)
  • German: Leitsilber
  • French: vernis conducteur / résine à l'argent / colle conductrice
  • Spanish: ?

the silver should be available anywhere were you can buy electronic components. It may be also available as car equipment (for repairing the rear-window heating).

Replacement

New Membranes

New membranes are available for other home computers. But none are sold for CPCs...?

Adapters for PC Keyboards

The CPCKey circuit translates the serial PC Keyboard signals to CPC keyboard matrix signals (the circuit uses a lot of components though). A simplified solution may be a single chip with built-in microprocessor, flash memory, and I/O ports.

Rewired PC Keyboards

Cut all wires on the circuit board, and rewire them as in the CPCs keyboard matrix. Sounds simple, but it's quite a lot of work. Of course it works only with keyboards that do have a real circuit board (eg. many inexpensive noname keyboards use boards), not with membrane based keyboards (eg. some of the infamous overpriced Cherry keyboards).

Pictures

  • CPC 6128 keyboard membrane

  • KC Compact with robust circuit board

Weblinks

Retrieved from "https://gryzor.info/index.php?title=Keyboard_Membrane_Repair/Replacement_Guide&oldid=45049"