Difference between revisions of "Standard Memory Expansions"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Semi-Standard Expansions) |
(→Expansions that are unknown how they work, and if they are standard or not) |
||
| Line 45: | Line 45: | ||
== Expansions that are unknown how they work, and if they are standard or not == | == Expansions that are unknown how they work, and if they are standard or not == | ||
| − | * [[RAM7 2Mb memory expansion]] - is that 2Mbit or 2Mbyte? what I/O ports would be used to access 2MByte? | + | * [[RAM7 2Mb memory expansion]] - is that '''2Mbit or 2Mbyte? what I/O ports''' would be used to access 2MByte? |
* [[Data Media SP64]] - all unknown | * [[Data Media SP64]] - all unknown | ||
* [[Dk'tronics Silicon Disc]] ([[Dk'tronics]]) - all unknown | * [[Dk'tronics Silicon Disc]] ([[Dk'tronics]]) - all unknown | ||
* [[Phoenix M64]] - all unknown | * [[Phoenix M64]] - all unknown | ||
Revision as of 13:21, 6 February 2010
Contents
Technical
The standard expansions are based on the RAM banking logic from the CPC6128, ie. equivalent to the fourth Gate Array register in the CPC6128 (or more precisely, the PAL that assists its Gate Array chip).
- Accessing a 64K expansion (or the first 64K of a bigger expansion) is compatible to the 128K in the CPC6128
- For full CPC6128 compatibility one may need some patches (eg. CP/M Plus will stiff refuse to work; because it "detects" the 128K by checking the BASIC ROMs version number)
Expansions bigger than 64K combine the CPC6128-style mapping with some formerly unused chips in the fourth Gate Array register:
Gate Array, Port 7Fxxh:
7-6 Must be 3 (aka Gate Array Register 3) 5-3 Bank number in 64K units (for expansions bigger than 64K) (max = 512K) 2-0 Bank mapping in 16K fragments (as on normal CPC 6128 Gate Array)
The 16K fragments are consisting of 8 banks. Banks 0-3 are the internal RAM, banks 4-7 are external RAM (taken from the currently selected 64K block).
Capacity
Standard expansions can contain between 64K and 512K memory.
- A nnK expansion adds nn Kbytes to the internal 64 Kbytes in the CPC. So the resulting total size is nn+64 Kbytes.
- That nn+64 Kbytes formula does in most (or all) cases also apply on the CPC 6128:
- only 64 Kbytes of it's internal memory are used
- the 2nd half of internal memory is disabled and replaced by the expansion RAM
- so, the resulting size is only nn+64 Kbytes, not nn+128 Kbytes
Standard Expansions
- Dk'tronics memory expansion - 64K and 256K expansions
- Dobbertin Memory Expansion
- CPC4MB (DIY) - compatible with standard 512 Kbyte expansion (plus extra non-standard 3.5 MBbyte)
- RAM BOX 512Kb memory expansion (is that lowercase "b" meaning 512kbit=64Kbyte ???)
- SYMBiFACE II - includes (among others) 512K RAM expansion
Semi-Standard Expansions
- Aleste 520EX - a CPC clone that allows to access 256K (of its total 512K memory) in semi-standard fashion (ie. as on a 64K computer with 192K expansion)
- Inicron RAM-Box - not fully compatible with standard expansions (semi-standard)
These two "semi-standard" ones can map some expansion banks only to 4000h..7FFFh.
Non-Standard Expansions
- Otten & Fecht 1 MB RAM-Disc - Accessed through I/O ports (RAM is not mapped to memory)
- Vortex Expansions RAM card - an older expansion, uses 32K-banks, not compatible with the later standard
Expansions that are unknown how they work, and if they are standard or not
- RAM7 2Mb memory expansion - is that 2Mbit or 2Mbyte? what I/O ports would be used to access 2MByte?
- Data Media SP64 - all unknown
- Dk'tronics Silicon Disc (Dk'tronics) - all unknown
- Phoenix M64 - all unknown
