Difference between revisions of "Modify PC floppy drives"
From CPCWiki - THE Amstrad CPC encyclopedia!
(New page: This document explains how to modify some PC floppy drives to output a RDY-Singal. This signal is required by the CPC for best compatibility. == Mitsumi D359T3 == There is a small SMD re...) |
(No difference)
|
Revision as of 06:21, 1 November 2007
This document explains how to modify some PC floppy drives to output a RDY-Singal. This signal is required by the CPC for best compatibility.
Mitsumi D359T3
There is a small SMD resistor on the back of the circuit board marked with the number [b]D.C.[/b]. Next to it is an empty solder pad marked with [b]RDY[/b]. Desolder the resistor and move it to the RDY-Position. The drive now outpus a RDY-Signal. Additional information and pictures at [1] (german, but at least the picture is helpful)
