|
|
| Line 1: |
Line 1: |
| − | DIY ESP32 Blinker: Designing and Building a Temperature Alarm Device Using ESP32
| |
| − | 1.Hardware Materials:
| |
| − | 1 * ESP32 development board
| |
| − | 1 * DHT11 temperature and humidity module
| |
| − | 1 * MQ-2 smoke module
| |
| − | 1 * MX1508 motor driver module
| |
| − | 1 * DC motor
| |
| − | 1 * OLED display module [white] [0.96 inches]
| |
| − | 1 * Buzzer module
| |
| − | 1 * MLX90614 infrared temperature measurement module
| |
| − | 1 * MICRO data cable [0.5m]
| |
| − | 1 * Battery [USB-A/microUSB]
| |
| − | Other potential components required (breadboard, resistors, capacitors, wires/DuPont wires, etc.)
| |
| − | Possible tools needed (multimeter, soldering iron and solder, pliers/scissors, wire strippers/lighter, regular tape/electrical tape/glue gun, etc.)
| |
| − | 2.Functionality:
| |
| − | Step1:The [https://www.unikeyic.com/products/100260146533367/ESP32-C3-13.html ESP32] development board reads temperature and humidity using the DHT11 sensor module, displaying the environmental temperature and humidity on the OLED screen and mobile app. When the temperature exceeds a certain level, the fan will be turned on.
| |
| − | Step2: The ESP32 development board monitors smoke gas concentration using the MQ-2 smoke sensor module. If the concentration exceeds a predefined level, the buzzer will trigger an alarm. The current smoke concentration and alarm status can be viewed on both the OLED screen and the mobile app.
| |
| − | Step3: The ESP32 development board measures both object and ambient temperatures using the MLX90614 infrared thermometer module. If the body temperature exceeds a specified threshold, warning messages will be displayed on the OLED screen and the mobile app
| |
| − | Step4: Users can set the smoke concentration threshold via the mobile app.
| |
| − | Step5: Users can configure the environmental temperature threshold through the mobile app.
| |
| − | Step6: Users can set the human body temperature threshold via the mobile app.
| |
| − | For any details not specifically covered, please consult the requirements and concept images/videos for guidance.
| |
| − | 3.post-update circuit diagram
| |
| − | 3.1Schematic diagram:
| |
| − | 3.2PCB diagram
| |
| − | 3.33D diagram
| |
| − | 3.4complete Arduino code
| |
| − | Below is the detailed process of the development code.
| |
| − | 4.Effect Demonstration
| |
| − | 4.1Blinker APP Mobile Interface
| |
| − | 4.2Video [https://www.bilibili.com/video/BV16u41127e6/ link]
| |
| | | | |
| − | Tag:Temperature Alarm Device, ESP32 Development Board, Electronic Components
| |
