Changes
/* Software */
== Flash utility usage ==
The RSX commands need to be activated in order to be used. To activate the RSX commands, insert the utility disk and type:
'''RUN"flash'''
After enabling the RSX, you can use the following commands:
'''|FLASH,"filename",slot'''
'''Important''': After running any of the commands all the slots will be disabled until a power down is performed.
== DIP Switch configuration ==
'''Switches 1 & 2''' select one out of four banks. Each bank has a different lower and upper ROM set.
'''Switch 3''' enables or disables the upper ROMs (Except BASIC)
'''Switch 4''' enables or disables lower ROM and BASIC ROM.