Difference between revisions of "MFM"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(→‎Syncing)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
=MFM=
 
−
 
 
MFM is an acronym for "Modified Frequency Modulation" and is a data encoding used on floppy discs. It is used by the [[NEC 765]].
 
MFM is an acronym for "Modified Frequency Modulation" and is a data encoding used on floppy discs. It is used by the [[NEC 765]].
  
 
MFM is stored as flux transitions on the disc. The flux transitions are converted by the read/write head into a 1 or 0.
 
MFM is stored as flux transitions on the disc. The flux transitions are converted by the read/write head into a 1 or 0.
  
−
MFM stores data as a stream of bits with clock bits and data bits interleaved. Clock bits are transmitted first and their value is the NOR of the previous data bit and the current data bit. Data is transmitted starting with bit 7 down to bit 0.
+
MFM stores data as a stream of cells which contain a data bit and a clock bit. The data separator synchronises to a continuous pattern of zeros, and when synced, will transmit data and clock bits to the FDC as separate signals.
 +
 
 +
The value of a clock bit is the NOR of the previous data bit and the current data bit. Data is transmitted starting with bit 7 down to bit 0.
  
 
e.g.
 
e.g.
Line 14: Line 14:
 
Each clock and data bit on disc is 2microseconds in duration which means a full byte is 32 microseconds (2 * 16 bits).
 
Each clock and data bit on disc is 2microseconds in duration which means a full byte is 32 microseconds (2 * 16 bits).
  
−
===Syncing===
 
−
 
−
In order to read the data correctly and to ensure the bits are in the expected order a specific bit pattern is used for syncing. This bit pattern is specific to the format used by the FDC.
 
−
 
−
When this pattern is recognised then all data following is synced and will always read the same.
 
  
−
This special value used by the NEC765 is 4489 and has the following properties.
+
[[Category:Hardware]][[Category:DATA Storage]]
−
* 4489 is an encoded version of the data byte A1 and has bit 7 set. It doesn't matter what the value of the previous byte is, the first clock of 4489 will always be 0. Therefore the pattern 4489 can't be influenced by data around it.
+
−
* To make the value special, it has a "missing clock". What this means is that one of the clocks is forced to 0. The equivalent A1 byte encoded to MFM without the missing clock is different, therefore it is unique.
+

Latest revision as of 13:00, 13 January 2019

MFM is an acronym for "Modified Frequency Modulation" and is a data encoding used on floppy discs. It is used by the NEC 765.

MFM is stored as flux transitions on the disc. The flux transitions are converted by the read/write head into a 1 or 0.

MFM stores data as a stream of cells which contain a data bit and a clock bit. The data separator synchronises to a continuous pattern of zeros, and when synced, will transmit data and clock bits to the FDC as separate signals.

The value of a clock bit is the NOR of the previous data bit and the current data bit. Data is transmitted starting with bit 7 down to bit 0.

e.g. <clock for bit 7> <bit 7> <clock for bit 6> <bit 6> <clock for bit 5> <bit 5>...

<clock for bit 5> = <bit 6> EOR <bit 5>

Each clock and data bit on disc is 2microseconds in duration which means a full byte is 32 microseconds (2 * 16 bits).

Retrieved from "https://gryzor.info/index.php?title=MFM&oldid=102878"