View source for Programming the V9990: Learning by disassembling the "Robot" demo

'''<big>V9990 Robot-Demo</big>'''

Demo File:
For executing extract files on a CPC floppy or upload it on the M4 board and change directory into the DSK container (|CD,"ROBOT.DSK").

Run file "ROBOT.BIN" and wait some time. At least a running robot through a forest will be shown.

You should be able to move (left, right, jump up) the robot via cursor keys and fire a bullet with space.

https://www.cpcwiki.eu/index.php/File:Robot.dsk

(there might be some DSK files around where you can't find the "ROBOT.BIN" file. The DSK container attached is a version made by @Geco.

In the case you don't have it you nevertheless can run the demo by executing the files in following 10 order:
# run"clear >
# run"a1 > 
# run"a2 > 
# run"a3 > 
# run"b1 > 
# run"b2 > 
# run"b3 > 
# run"c1 > 
# run"c2 > 
# run"c3 >
# run"robo)