*For RAM banking settings see Register 3 of the [[Gate Array]] (Note that no settings are stored in the gate array, but the PAL and gate array share an I/O port address).
*Bit 14 of the PAL selection address must be at 1 on CPCs equipped with CRTCs 0, 1, 2. It can be at 0 or 1 on CRTCs 3 and 4. For compatibility reasons, it is strongly advised to always set bit 14 to 1 to select PAL.See [https://www.cpcwiki.eu/forum/news-events/release-of-amstrad-cpc-crtc-compendium-and-amazing-demo-rev-2021/msg239536 Discussion on the forum]
*CPC 464/664 cannot deal with A14/A15 for bank 0 like the 6128 does. External RAM expansions differ in their behaviour regarding &C3 mode.See [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/464-preasic-c3-ram-configuration-and-rom-7/ Discussion on the forum]
*[[Gate Array and ASIC Pin-Outs]]
[[Category:Datasheet]]