Amstrad Printers

              DMP2000           DMP2160
Print Speed   105 CPS/50 CPS    160 CPS/80 CPS
LF Speed      200 mS(1/6 inch)  160 mS
Weight        -                 4.2Kg

Technical Specs

	DMP1	DMP2000	DMP3000	DMP4000
Print System	Impact Dot-Matrix	Impact Dot-Matrix	Impact Dot-Matrix	Wiredot-Matrix
Print direction	Unidirectional (left to right)	?	?	?
Print Speed	50 CPS	105 CPS max	105 CPS (normal width) 52 CPS (double width)	200 CPS (standard) 50 CPS (NLQ)
Printing Characteristics (vertical x horizontal)	7 (+1 space) x 5	9 x 9 (normal char) 9 x 10 (double width char) 9 x chosen amount (9 pin bit-image)	9 x 9 (normal char) 9 x 10 (expanded char) 9 x chosen amount (9 pin bit-image) 8 x chosen amount (bit-image)	9 x 9 (ASCII chars - table 1) 18 x 9 (ASCII chars - table 2) 12 x 11 (special chars - table 3.1 and 3.2) 24 x 11 (special chars - table 4.1 and 4.2) 8 x chosen amount (bit-image graphics)
Character Sets	128 (actually only 96) chars, 7bit ASCII, or international chars via DIP switches	96 characters ASCII + international character sets	96 characters ASCII + Italics + international character sets	ASCII-96, Italics-96, NLQ-96, NLQ Italics-96 International character sets-9, Special characters-132
Normal Character Size	?	?	2.1 (width) x 2.55 (height) mm
Dot Spacing	1/60" (H) x 1/63" (V)	?	?	?
Standard (Pica)	10 CPI	10 CPI/80 CPL	10 CPI/80 CPL	10 CPI/136 CPL
Mini (Elite)	-	12 CPI/96 CPL	12 CPI/96 CPL	12 CPI/163 CPL
Condensed	-	17 CPI/137 CPL	?	17 CPI/233 CPL
Double Width Standard	(?)	5 CPI/40 CPL	5 CPI/40 CPL
Double Width Mini	-	6 CPI/48 CPL	6 CPI/48 CPL
Double Width Condensed	-	8.5 CPI/68 CPL	8.5 CPI/68 CPL
Number of Columns	80 columns-character mode 480 dot columns-graphics mode	80 (Standard) 40 (Double) 132 (Condensed) 66 (Double Width Condensed)	80 (Standard) 40 (Double) 132 (Condensed) 66 (Double Width Condensed)	136 (standard) 233 (condensed)
Line Feed Rates	6 lines/inch-character mode 9 lines/inch-graphics mode	1/6 inch 1/8 inch 7/72 inch n/216 inch programmable n/72 inch programmable	1/6 inch 1/8 inch 7/72 inch n/216 inch programmable n/72 inch programmable	1/6 inch 1/8 inch 7/72 inch n/216 inch programmable n/72 inch programmable
Line Feed Speed	10 lines/sec (at 6 lines/inch) 15 lines/sec (at 9 lines/inch)	200 mS(1/6 inch)	200 mS(1/6 inch)	100 mS(1/6 inch)
Paper Type	4.5 to 10 inches acceptable (pin to pin 4 to 9.5 inches)	4.5 to 10 inches fan-fold (tractor feed) 4 to 9.5 inches cut sheet or roll paper (friction feed)	4.5 to 10 inches fan-fold (tractor feed) 4 to 9.5 inches cut sheet or roll paper (friction feed)	Tractor feed (fan fold) - 3 to 16.5 inches (75 to 420 mm) Friction feed (cut sheet or roll) - 2 to 15.5 inches (50 to 395 mm)
Number of Copies	Two including original (Thickness 0.15mm or less)	2 sheets (including original) 40 gsm pressure-sensitive paper train	2 sheets (including original) 40 gsm pressure-sensitive paper train
Interface	Parallel (Centronics compatible)	Parallel (Centronics compatible)	Parallel (Centronics compatible)	Parallel (Centronics compatible)
Ink Ribbon		Cassette (1 million characters per ribbon)	Cassette (1 million characters per ribbon)
Dimensions	447 (w) x 315 (d) x 114 (h)	380 (w) x 250 (d) x 100 (h) mm	400 (w) x 250 (d) x 100 (h) mm	24 (w) x 14 (d) x 5 (h) inches (600 x 350 x 120 mm)
Weight	4.8kg	?	4.2Kg	9.5kg
Mains Supply	220-240V AC 50Hz	220-240V AC 50Hz	220-240V AC 50Hz	220-240V AC 50Hz

DIP Switch Settings

DMP2000/DMP3000:

DS1-1	Interntional characters	Bit0=0	Bit0=1
DS1-2	Interntional characters	Bit1=0	Bit1=1
DS1-3	Interntional characters	Bit2=0	Bit2=1
DS1-4	CR Function	CR only	CR & LF
DS1-5	Paper out sensor	Enable	Disable
DS1-6	Page length	11 inch	17 inch
DS1-7	Code unit	8 units	7 units (set this for Apple computers)
DS1-8	Default character set	Standard	NLQ-Standard
DS2-1	Zero character	Unslashed	Slashed
DS2-2	Default skip perforation	Disable	Enable
DS2-3	Buffer mode	Character	Graphics
DS2-4	Buffer mode	Character/Graphics	Download
DS2-5	SLCT IN signal	Not sent	Automatically sent
DS2-6	Alarm beeper	Disable	Enable
DS2-7	Default typeface	Bold off	Condensed & bold on
DS2-8	Default typeface	Condensed off	Bold on
DS2-9	Do not use
DS2-10	Do not use