Changes
=== Signal assignment on connectors<br> ===
==== Floppy Standard floppy connector 34pin <br> ====
<pre>Floppy | Signal description
connector | for standard floppy 34 pin connector 34pin
----------+---------------------------------------------------
1..33 | GND
<br>
==== CPC-CD201 (internal floppy 26pin connector) ====<pre>CPC-CD201 | Signal description internal
| for CPC internal floppy 26 pin connector
| (numbering from amstrads Amstrads repair manual)
----------+---------------------------------------------------
1..25 | GND
<br>
==== CPC-PL-9 (external floopy 34pin centronics connector) ====
<pre>CPC-PL-9 | Signal description external
| for CPC external floppy 34 pin centronics connector
| (numbering from amstrads Amstrads repair manual)
---------+--------------------------------------------------
2..34 | GND
1 | /RDY ready (or /DSKCHG) depending on model or drive configuration
</pre>
<br>
=== Pinning translation between different connectors (CPC-PL-9, Centronics 36pin, Floppy connector 34pin)<br> ===
**/++ Flatcable signal</pre>
<br>
=== Wireing diagrams<br> ===
==== External floppy connector CPC-PL-9 to standard floppy connector 34pin ====<pre>External floppy connector PL-9 to standard floppy connector 34pin=================================================================
(flat cable / crimp variant view)
<br>
==== Internal floppy connector CD201 to standard floppy connector 34pin ====<pre>Internal floppy conntector CD201 to standard floppy connector 34pin==================================================================
(flat cable / crimp variant view)
03 NC
02 NC
01 NC</pre>
=== Issues ===
==== Floppy drive ====
<pre>Floppy drive issues
===================
* This cables work for drive which are jumpered as drive 1 or /DS1. This is normally the default selection on drive delivery. Also make * Make sure you find a drive which has the possibility to generate a ready signal instead of a disc change signal.
</pre>
==== Disk issues<br> ====
<pre>Disk issues
============
If you intend think about to use a HD drive, make sure to close the HD detection hole on your disk. </pre>