Changes
I have recently received a CPC6128 and had the problems to connect 2x3,5" drives to the CPC (internally and externally). The main problem was, that i've could not find detailed informations about the wireing and the signals (even here on CPCWIKI.EU) This is my contribution to this issue. I will add the wireing for the DDI-1 soon.
=== Signal assignment on connectors (Floppy connector, CPC-CD201, CPC-PL-9)<br> === ==== Floppy connector 34pin ====
<pre>Floppy | Signal description
connector | for standard floppy 34 pin connector 34pin |
----------+---------------------------------------------------
1..33 | GND
34 | /RDY ready (or /DSKCHG) depending on model or drive configuration</pre>
<br>
==== CPC-CD201 (internal floppy 26pin connector) ====
<pre>CPC-CD201 | Signal description internal
| for CPC internal floppy 26 pin connector
26 | /RDY ready (or /DSKCHG) depending on model or drive configuration</pre>
<br>
==== CPC-PL-9 (external floopy 34pin centronics connector) ====
<pre>CPC-PL-9 | Signal description external
| for CPC external floppy 34 pin centronics connector
| (numbering from amstrads repair manual)
---------+--------------------------------------------------
