Changes
/* PAL Type Detection */
Note: The CPC 464/664 cannot deal with A14/A15 for Base 64k page like the 6128 does. So external RAM expansions can differ in their behaviour regarding &C3 mode. See [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/464-preasic-c3-ram-configuration-and-rom-7/ Discussion on the forum] and [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/dk%27tronics-ram-c3-selection-464/ Another discussion]
<br>
== ASIC compatibility ==
Most existing expansions except Gemini have a problem. [https://pulkomandy.github.io/shinra.github.io/gemini.html Source]
The issue is specific to the Amstrad Plus machines which add yet another complication to the memory mapping handling on CPC machines. Basically, the ASIC can be memory mapped and hide a part of the RAM. This works well for the main RAM bank, and on the CPC, it also works for the internal extra 64K of RAM, which can be mapped at the same address. If you try to map both the RAM and the ASIC there, the ASIC is mapped and the RAM is not accessible until the ASIC is moved out of the way.
Unfortunately, memory expansions designed for the classic CPC does not take this into account. For some of them, because they were designed before the Amstrad Plus ASIC existed, and for some, the designers didn't think of it or decided it was not important. As a result, these extensions can enter in conflict with the ASIC, which will result, at best, in software crashes, and at worst, in damage to the hardware.
Software that is known to hit this problem with existing memory expansions:
*CRTC3 demo
*Soundtracker DMA
<br>
