Difference between revisions of "Connector:Cassette recorder"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Aleste Tape/Sound Connector (female)) |
(added information on remote jack, standard pinout of cassette recorders and how to connect properly to the CPC) |
||
| (6 intermediate revisions by 3 users not shown) | |||
| Line 7: | Line 7: | ||
4 Data Input |3 1| | 4 Data Input |3 1| | ||
5 Data Output \5_2_4/ | 5 Data Output \5_2_4/ | ||
| − | * The two Remote Control pins are connected to a | + | * The two Remote Control pins are connected to a relay inside of the CPC, the relay becomes closed when the /Motor On bit in PIO Port C is set to zero, ie. the cassette recorder may use the relay to switch its power supply on and off when Play and/or Record is pressed - this is of course supposed for low-voltages only. You have to connect both pins to the remote connector of the cassette recorder. |
* The CPC 6128+ does not include a Cassette Connector. | * The CPC 6128+ does not include a Cassette Connector. | ||
| Line 18: | Line 18: | ||
5 Motor On (TTL) \5_2_4/ | 5 Motor On (TTL) \5_2_4/ | ||
Shield GND | Shield GND | ||
| − | * Caution: The connector looks same as on CPC, but the Pin-Outs are entirely different, and, Motor On is a TTL output (instead of a | + | * Caution: The connector looks same as on CPC, but the Pin-Outs are entirely different, and, Motor On is a TTL output (instead of a Relay) |
== Aleste Tape/Sound Connector (female) == | == Aleste Tape/Sound Connector (female) == | ||
| Line 30: | Line 30: | ||
* The Left/Right pins are actually shortcut with each other on the Aleste mainboard, so sound is mono. | * The Left/Right pins are actually shortcut with each other on the Aleste mainboard, so sound is mono. | ||
* There is no Tape Motor Control (the corresponding PIO bit is mis-used as Printer Strobe in the Aleste). | * There is no Tape Motor Control (the corresponding PIO bit is mis-used as Printer Strobe in the Aleste). | ||
| − | * According to the Russian User Manual the two Tape pins are NC. They do exist | + | * According to the Russian User Manual the two Tape pins are NC. They do exist in the schematics though. |
| − | in the schematics though. | + | |
| + | == External Cassette Ports == | ||
| + | |||
| + | * [[Draysoft Doubler]] (external tape input, for tape-to-tape transfers) | ||
| + | |||
| + | == Connector on Cassette recorder == | ||
| + | |||
| + | 1 (Left) Input __ __ | ||
| + | 2 Ground / - \ | ||
| + | 3 (Left) Output | | | ||
| + | 4 (Right) Input |3 1| | ||
| + | 5 (Right) Output \5_2_4/ | ||
| + | |||
| + | On mono cassette recorders, pin 4 and 5 can be missing. | ||
| + | |||
| + | == Adapter cable == | ||
| + | |||
| + | Computer Recorder | ||
| + | |||
| + | +---- 1 Input (l) | ||
| + | Output 5 ---------------------+---- 4 (Input r) | ||
| + | Ground 2 -------------------------- 2 Ground | ||
| + | Input 4 ---------------------+---- 5 (Output r) | ||
| + | Remote 1 --------------- +---- 3 Output (l) | ||
| + | Remote 3 -------------- \ | ||
| + | \ \ | ||
| + | \ \--------- 1 Remote-jack | ||
| + | \---------- 2 Remote-jack | ||
| + | |||
| + | |||
| + | [[Category:Peripherals]][[Category:CPC Internal Components]][[Category:DATA Storage]] | ||
| + | |||
| + | == See Also == | ||
| + | |||
| + | * [[Read error codes]] | ||
Latest revision as of 16:01, 22 March 2022
Contents
CPC Tape Connector
External Cassette Connector (CPC 664/6128 only) (5 pin DIN, female)
1 Remote Control __ __ 2 Ground / - \ 3 Remote Control | | 4 Data Input |3 1| 5 Data Output \5_2_4/
- The two Remote Control pins are connected to a relay inside of the CPC, the relay becomes closed when the /Motor On bit in PIO Port C is set to zero, ie. the cassette recorder may use the relay to switch its power supply on and off when Play and/or Record is pressed - this is of course supposed for low-voltages only. You have to connect both pins to the remote connector of the cassette recorder.
- The CPC 6128+ does not include a Cassette Connector.
KC Compact Tape Connector
KC Compact uses a 5pin DIN connector
1 Cas-Write __ __ 2 GND / - \ 3 Cas-Read | | 4 Sound-Mono |3 1| 5 Motor On (TTL) \5_2_4/ Shield GND
- Caution: The connector looks same as on CPC, but the Pin-Outs are entirely different, and, Motor On is a TTL output (instead of a Relay)
Aleste Tape/Sound Connector (female)
Aleste 520EX uses a 5pin female DIN connector
1 Tape In __ __ 2 GND / - \ 3 Sound Mono-Left | | 4 Tape Out |3 1| 5 Sould Mono-Right \5_2_4/ Shield GND
- The Left/Right pins are actually shortcut with each other on the Aleste mainboard, so sound is mono.
- There is no Tape Motor Control (the corresponding PIO bit is mis-used as Printer Strobe in the Aleste).
- According to the Russian User Manual the two Tape pins are NC. They do exist in the schematics though.
External Cassette Ports
- Draysoft Doubler (external tape input, for tape-to-tape transfers)
Connector on Cassette recorder
1 (Left) Input __ __ 2 Ground / - \ 3 (Left) Output | | 4 (Right) Input |3 1| 5 (Right) Output \5_2_4/
On mono cassette recorders, pin 4 and 5 can be missing.
Adapter cable
Computer Recorder
+---- 1 Input (l)
Output 5 ---------------------+---- 4 (Input r)
Ground 2 -------------------------- 2 Ground
Input 4 ---------------------+---- 5 (Output r)
Remote 1 --------------- +---- 3 Output (l)
Remote 3 -------------- \
\ \
\ \--------- 1 Remote-jack
\---------- 2 Remote-jack
