Page history

Arnoldemu

→‎LK4 - Screen Refresh Rate

Arnoldemu

→‎LK1,LK2,LK3 - Manufacturer ID

MacDeath

no edit summary

Nocash

Undo revision 61602 by TFM - AMSDOS uses CALL B912 for deciding whether to boot CPM, as far as known AMSDOS doesn't check PPI inputs, so LK5 must affect ROM banking - correct me if that's wrong!

TFM

→‎GX4000:LKs: The state of the LK has NO influence on the ROM banking, it is just read and used by AMSDOS.

Nocash

→‎LK1,LK2,LK3 - Manufacturer ID

Nocash

→‎LK1,LK2,LK3 - Manufacturer ID

Nocash

→‎LK1,LK2,LK3 - Manufacturer ID

Nocash

→‎LK4 - Screen Refresh Rate

Nocash

→‎LK4 - Screen Refresh Rate

Nocash

→‎LK1,LK2,LK3 - Manufacturer ID

Nocash

→‎GX4000:LKs

Nocash

→‎CPC6128:LK7 aka CPC664:LK201 - Autoboot CP/M

Nocash

→‎GX4000:LKs

Nocash

→‎GX4000:LKs

Nocash

→‎GX4000:LKs

Nocash

→‎CPC Plus:LK106 - Unknown

Nocash

→‎GX4000:LKs

Nocash

→‎CPC6128:LK7 - Autoboot CP/M

Nocash

→‎CPC6128:LK5,LK6,LK8 - Disable 128K RAM Banking

Nocash

→‎CPC Plus:LK105 - Autoboot CP/M

Nocash

→‎CPC Plus:R129 aka R29 (10kOhm) - Disc Vers Enable

Nocash

→‎CPC Plus:LK106 - Unknown

Nocash

no edit summary

Nocash

→‎CPC Plus:LK105 - Autoboot CP/M

Nocash

→‎CPC Plus Cartridges:LK1-LK6 - EPROM Address Lines

Nocash

→‎CPC Plus:R130 aka R30 (10kOhm) - 8bit Printer Enable

Nocash

no edit summary

Nocash

→‎CPC Plus Cartridges:LK1-LK6 - EPROM Address Lines

Nocash

→‎CPC Plus Cartridges:LK1-LK6 - EPROM Address Lines

Nocash

→‎DDI-1:LK2,LK3 - Disc Low-Level Stuff or so

Nocash

no edit summary

Nocash

→‎DDI-1 : LK1

Nocash

Created page with '== LK1,LK2,LK3 Manufacturer ID == LK1,LK2,LK3 connect to PPI Port B, Bit1-3. The links select the manufacturer name (which is displayed by the BIOS in the power-up mess…'